|
A TVS surge suppression diode is built into DC coils. Nominal breakdown voltage: 68V. Model code 1.5 KE68CA Steady state power dissipation @ 75°C is 6.5 W and peak pulse dissipation is 1500 W for 1 ms, nonrepetitive.
|
|
|
|
Coil windings utilize Class N, (392° F [200 °C] rated) magnet wire.
|
|
|
|
Weatherized coil diameter is 4 mm larger than standard 770 series coil.
|
|
|
|
Power cable with mating connector is required and is not included with product.
|
|
|
|
The Metri-Pack, Series 150-2M connector satisfies the requirements of thermal shock tests. In this test, the coil is energized to achieve its stabilized temperature and then immediately immersed into ice cold water. This process is repeated 5 times, after which, the insulation resistance of the coils should not fall below 10 megaohms.
|
|
|
|
RoHS compliant. Restricted materials less than 0.1% total by weight.
|
|
|
|
Constructed of an external steel frame, encapsulated with Dupont 77G33L or engineering approved equivalent for weatherization.
|
|
|
|
An addtional weatherization kit is required with this coil. Weatherization kits are cartridge model dependent. See Related Information below.
|
|
|
|
This weatherized coil is rated for IP69K and 1000 hours of salt spray.
|
| |