Baugruppe erstellen

Sun's Assembly Build Process allows you to configure a cartridge and manifold, or main stage and pilot stage cartridge, and build a digital assembly in three dimensional space. The resulting output of this process is the assembly product page, including configuration-specific images, symbols, product information and CAD files for download.

The Assembly Build Process can be accessed from either a cartridge or manifold product page. Only valid choices are allowed.

From a manifold page, you must first choose your cartridge function. Once you choose your function, click on the BUILD ASSEMBLY button below the WHERE TO BUY BUTTON. Once clicked, you will be presented with valid cartridges for your manifold. Select the cartridge of your choice and follow the instructions at the top of the page. If your particular combination has been generated before, the resulting assembly page will be available immediately. If not, you will be asked to enter your email address. Once the page is complete, an email will be sent to you including a link to the assembly product page.

From a cartridge product page, click on BUILD ASSEMBLY and you will be presented with a listing of compatible manifolds. In the case of main stage and pilot stage cartridges, you can either build a cartridge to cartridge assembly or a cartridge to manifold assembly. Once your choice has been made, follow the instructions at the top of the page. If your particular combination has been generated before, the resulting assembly page will be available immediately. If not, you will be asked to enter your email address. Once the page is complete, an email will be sent to you including a link to the assembly product page.

Please note that the Assembly Build Process is an automated process. It can be utilized at any time. Pages are generated typically within minutes but delays can occasionally be expected. In the event of a delay, a team at Sun will work to resolve the issue to ensure you receive your information as quickly as possible.

770er Serie - Viton, Spule Dichtsatz

Alle expandieren

Technische Eigenschaften [ + ]

Dichtsätze für Magnetspulen von SUN für Hauptstufenventile und Proportionalventile beinhalten alle Austauschdichtungen, eine Ersatzmutter und eine Montageanleitung. Beachten Sie: alle Dichtungen sind aus Viton.

Zurück nach oben

Hierzu kombinierbare Produkte [ + ]

What models can this kit be used with?

DMDA 3/2-Wege Magnetventil, Schieberbauweise
DNCA 4/2-Wege Magnetventil, Schieberbauweise, positive Überdeckung
DNDA 4/2-Wege Magnetventil, Schieberbauweise
DNDC 4/3-Wege Magnetventil, Schieberbauweise
DNDY 6/2-Wege Magnetventil, Schieberbauweise
DTCA
2/2-Wege, direkt gesteuert, magnetbetätigtes Sitzventil mit positiver Überdeckung
FMDA Elektroproportionales 3-Wege-Stromregelventil, Zulaufregelung
FMDB Elektroproportionales 3-Wege-Stromregelventil, Zulaufregelung
FPCC Elektroproportionales Stromregelventil, stromlos geschlossen
FPCH Elektroproportionales Stromregelventil, stromlos offen
FPFK Vorgesteuert, In Ruhestellung geschlossen , proportional Drossel mit Umgehungsrückschlagventil
FPHK Vorgesteuert, In Ruhestellung geschlossen , proportional Drossel mit Umgehungsrückschlagventil
HDDA 2/2-Wege Magnetventil, Sitzbauweise, nach Rückschlagventil
PRDL
Elektroproportionales 3-Wege-Druckregelventil, direkt gesteuert, negative Überdeckung
PRDM Elektroproportionales 3-Wege-Druckregelventil, direkt gesteuert, negative Überdeckung, inverse Funktion
PRDN Elektroproportionales 3-Wege-Druckregelventil, direkt gesteuert, inverse Funktion
PRDP
Elektroproportionales 3-Wege-Druckregelventil, direkt gesteuert
PSDL Elektroproportionales 3-Wege-Druckregelventil, direkt gesteuert, negative Überdeckung, Leckölabfuhr über Anschluss 4
PSDP Elektroproportionales 3-Wege-Druckregelventil, direkt gesteuert, Leckölabfuhr über Anschluss 4
RBAN Elektroproportionales Vorsteuer-Druckbegrenzungsventil, inverse Funktion
RBAP Elektroproportionales Vorsteuer-Druckbegrenzungsventil