Magnetbetätigt, entlastbare Druckbegrenzung Baugruppe

Function

Function for XRIC: Normally Open
Normally Open
Technische Eigenschaften [ + ]

Diese Baugruppe bietet zwei Funktionen. Zum einen Druckbegrenzung von Anschluss 1 zum Tank (Anschluss 2), wenn die Einstellung überschritten wird. Zu anderen ermöglicht ein Magnetventil, das Druckbegrenzungsventil zu entlasten, wodurch der Druck einen minimalen Wert annimmt. Die Baugruppe ist entweder stromlos offen und erzeugt einen niedrigen Druck, bis die Spule bestromt wird oder stromlos geschlossen bei hohem Druck, bis die Spule bestromt wird.

  • Wegen Schieberleckage nicht für Lasthalteanwendungen geeignet.
  • Gegendruck in der Tankleitung (Anschluss 2) addiert sich im Verhältnis 1:1 direkt zur Ventileinstellung.
  • Ab sofort mit Magnetventilen der FLeX-Serie erhältlich. Bitte wählen Sie im Konfigurationsbereich das passende Magnetventil aus.
Technische Daten [ + ]
Gehäusetyp SandwichSandwich
Lochbild ISO 08ISO 08
Durchfluss 120 gpm480 L/min.
Gehäuseeigenschaften A nach TA nach T
Verkettungshöhe 3.44 in.87 mm
Mit Dichtplatte (siehe Hinweise) NeinNein
FAQs [ + ]

Es sind genau 250 "SUN" Tropfen in einem cubic inch oder 15 in einem ccm.

Reasons to anodize:

  • To increase corrosion resistance. Sun uses 6061-T651 aluminum. It is one of the most corrosion resistant aluminum alloys there is. Whether or not anodizing improves the corrosion resistance of 6061 aluminum is debatable. We have yet to have a manifold returned because of corrosion.
  • Appearance (color). The 2 colors that would appeal to Sun would be blue or black. Unfortunately these are the colors that are hardest to do consistently.
  • To provide a hard wear surface. Sun does not make parts-in-body valves. The manifold is just plumbing. We don't need a wear surface.
  • Because everyone else does it. Bad reason. 

Reasons to not anodize:

  • Cost. It's another process.
  • Logistics. When you make tens of thousands of manifolds a month and you anodize hundreds, it's a problem. Consistency. See above.
  • Stamping. After a body is anodized you cannot do any more stamping without making a mess.
    Inspection. Have you ever tried to look for burrs in a black anodized body? It's the old blackboard factory at night scenario.
  • Torque. You will experience an increase in breakaway torque when removing items from an anodized manifold.
  • Fatigue life. This is the best reason to not anodize. Fatigue failure is a very complex phenomenon. What it takes to initiate a crack is difficult to predict. What it takes to propagate a crack is readily defined. Anodizing produces a very thin, very hard, and very brittle surface on aluminum. The first time you pressurize an anodized aluminum manifold you have initiated fatigue cracks. Whether or not the stress is enough to propagate the cracks is a matter of pressure and manifold geometry. Anodizing an aluminum manifold grossly reduces the fatigue life by anywhere from 20% to 50%.

Direkt gesteuert Ventile werden genutzt, um Überdruck zu vermeiden und vorgesteuerte Ventile werden genutzt, um einen Druck zu regulieren. Wenn Sie unsicher in Ihrer Entscheidung sind, nehmen Sie ein direkt gesteuertes Ventil. SUNs direkt gesteuerte Ventile sind sehr schnell, schmutzunempfindlich, haltbar und robust. SUNs vorgesteuerte Ventile sind moderat schnell, haben einen geringen Druckanstieg über dem Volumenstrom und sind einfach einzustellen.

Info [ + ]
  • Die Spule muss separat bestellt werden. Siehe Zubehör: Teilenummer 760-***
  • Für detailliertere Informationen bezüglich der Ventile in dieser Zusammenstellung klicken Sie bitte auf den Modelcode im Bereich Included Components.
  • Wichtig: Beachten Sie bitte sorgfältig die maximalen Systemdrücke, denen das Gehäuse ausgesetzt ist. Der Druckbereich ist hauptsächlich abhängig vom Gehäusematerial. Anschlussart und Anschlussgröße sind von sekundärer Bedeutung. Zum Beispiel sind Aluminiumgehäuse nur bis zu einem Systemdruck bis 210 bar zugelassen, unabhängig von Anschlussart und -größe.
Zusätzliche Hilfsmittel [ + ]
Spuleninfo [ + ]

No coil selected.