740 Series, 12 VDC, low-power bobina con ISO/DIN 43650, Form A conector without TVS Diode

740212L : 740 Series, 12 VDC, low-power bobina con ISO/DIN 43650, Form A conector without TVS Diode
Technical Features [ + ]
  • Coil windings utilize Class N, (392° F [200 °C] rated) magnet wire.
  • Power cable with mating connector is required and is not included with the coil.
  • The coil is magnetically symmetrical and can be mounted on the solenoid tube in either direction for best cable access without affecting performance.
  • Coil is fully RoHS compliant. Restricted materials less than 0.1% total by weight.
  • The external steel shell is zinc-nickel plated and provides 1000-hour salt fog protection.
  • For optimum proportional performance, an amplifier with current sensing and adjustable dither should be used. Dither should be adjustable between 100 - 250 Hz.
  • IP rating for this coil is IP65/IP67.
  • This coil does not include a transient voltage suppression (TVS) diode and should only be used when surge suppression is included elsewhere in the electrical system. If no surge suppression is included in the circuit, the coil version with TVS diode should be used.
  • This coil is CE compliant. It meets the requirements of the Low Voltage Directive (2006/95/EC) and EN 60204-1:2006.
Technical Data [ + ]
Operating Temperature Range -40 to 230 °F-40 to 110 °C
Arc Suppression (TVS) NoneNone
Power Consumption (cold) - at rated voltage 17 Watts17 Watts
Maximum Ambient Temperature 212 °F100 °C
Resistance at 20º C 8.5 ohms ±10%8.5 ohms ±10%
Voltage/Frequency 12 VDC12 VDC
Operating Voltage Range +10%/-15%+10%/-15%
Duty Cycle Rating 100 %100 %
conector ISO4400 - EN/DIN175301-803, Form A (ISO/DIN 43650) 3-pinISO4400 - EN/DIN175301-803, Form A (ISO/DIN 43650) 3-pin
Solenoid Tube Diameter .62 in.15,7 mm
Coil Nut Torque 4.5 lbf in.0,5 Nm
Model Weight 6.4 oz.181 grams
Proportional Performance Data [ + ]
Maximum Current - FLeX Valves (100% Duty Cycle at Maximum Ambient Temperature) 820 mA820 mA
FAQs [ + ]
740 Series coils meet Sun specification S-367. This specification is on our website under Technical Resources and is also listed in the Additional Resources tab on applicable product pages. Please see sections 11 and 12 of Environmental Test Specification for Electrical and Electronic Components; S-367.
Used With [ + ]

What models can this kit be used with?

  • DBAF 3-vías direccional, operada por solenoide carrete válvula - capacidad de pilotaje (740 Series)
  • DBAFS 3-vías, cambio suave , direccional, operada por solenoide carrete válvula - capacidad de pilotaje (740 Series)
  • DFBD FLeX Series 2-vías , 2-stage, direccional, operada por solenoide disco válvula con anti-retorno de caudal inverso - caudal 2-1, 3000 psi (210 bar)
  • DFBE FLeX Series 2-vías , 2-stage, direccional, operada por solenoide disco válvula con anti-retorno de caudal inverso - caudal 2-1, 3000 psi (210 bar)
  • DMBD FLeX Series 3-vías, direccional, operada por solenoide carrete válvula - 3000 psi (210 bar)
  • DNBD FLeX Series 4-vías, 2-posiciones , direccional, operada por solenoide carrete válvula - 3000 psi (210 bar)
  • DTAF FLeX Series 2-vías , acción-directa , direccional, operada por solenoide blocking disco válvula
  • DTAFS FLeX Series 2-vías , cambio suave , direccional, operada por solenoide disco válvula - capacidad de pilotaje
  • DTBF FLeX Series 2-vías , acción-directa , direccional, operada por solenoide blocking disco válvula
  • FPBD FLeX Series pilot-operated, normalmente cerrado, electro-proporcional estrangulación - caudal 2-1 - 3000 psi (210 bar)
  • FPBE FLeX Series pilot-operated, normalmente cerrado, electro-proporcional estrangulación con anti-retorno de caudal inverso - caudal 2-1 - 3000 psi (210 bar)
  • FPBM FLeX Series pilot-operated, normalmente abierto, electro-proporcional estrangulación - caudal 2-1 - 3000 psi (210 bar)
  • FPBN FLeX Series pilot-operated, normalmente abierto, electro-proporcional estrangulación con anti-retorno de caudal inverso - caudal 2-1 - 3000 psi (210 bar)
  • RPEI Electro-proporcional alivio válvula - ajuste a alta presión sin comando
  • 991711300 XMD Series, 12-pin Deutsch prototype , single-output - 3M
  • 991712300 XMD Series, 12-pin Deutsch prototype , double-output - 3M
  • 991712600 XMD Series, 12-pin Deutsch prototype , double-output - 6M
  • 991713030 XMD Series, 2-pin Deutsch prototype - 30CM
  • 991713060 XMD Series, 2-pin Deutsch prototype - 60CM
  • 991740002 XMD Series, low-power coil clip juego
  • XMD-01 Configurable single-output driver used con proporcional y solenoid-operated switching valves
  • XMD-02 Configurable double-output driver used con proporcional y solenoid-operated switching valves
Additional Resources [ + ]