Bobina 12 VDC con infrarrojo integrado ahorrador de energía

7902E12V : Bobina 12 VDC con infrarrojo integrado ahorrador de energía
Technical Features [ + ]

The Power Saver is a compact, low profile coil/controller combination for use with switching solenoid valves. The Power Saver controls current to the coil to minimize power consumption. Bright LED indicators on the unit provide an overview of the operating status. Setup is accomplished through Sun's Amplifier Set Up Software or the Hand Held Programmer (HHP). There is no cover to remove and no tiny pots to set. Once configured, the settings are stored in permanent memory within the unit. The Power Saver is intended for use on continuous duty applications (minimum switches between on and off).

  • Easily configured using Sun's Amplifier Set Up Software or the Hand Held Programmer.
  • LED indication of Status and Output Current
  • Standard DIN 43650-Form A Connector - 4 pin
  • Adjustable current limited output with short circuit protection
  • Microprocessor controlled for consistent, reliable performance
  • All output limits are independently adjustable.
  • Glass filled nylon enclosure with Lexan light pipes and polyurethane potting compound
  • Power cable with mating connector is required and is not included with product.
  • CE approved - See CE Testing Results and Explanation, document number 999-991-260, for details
Technical Data [ + ]
Supply Voltage Equals coil voltage within +/-10%Equals coil voltage within +/-10%
Operating Temperature Range -4 to 158 °F-20 to 70 °C
Card Function ahorrador de energíaahorrador de energía
Output Current for 6 seconds (max.) 2000 mA2000 mA
Output Current for holding (max.) 1600 mA1600 mA
Voltage/Frequency 12 VDC12 VDC
conector ISO/DIN 43650, Form A, 4-pinISO/DIN 43650, Form A, 4-pin
Used With [ + ]

What models can this kit be used with?

  • DAALS
    2-vías , cambio suave , direccional, operada por solenoide carrete válvula - capacidad de pilotaje
  • DBALS
    3-vías, cambio suave , direccional, operada por solenoide carrete válvula - capacidad de pilotaje
  • DFDA
    2-vías , 2-stage, direccional, operada por solenoide disco válvula - caudal 1-2
  • DLDAS
    2-vías , cambio suave , direccional, operada por solenoide carrete válvula
  • DMDA 3-vías, direccional, operada por solenoide carrete válvula
  • DMDAS 3-vías, cambio suave , direccional, operada por solenoide carrete válvula
  • DNCA 4-vías, 2-posiciones , direccional, operada por solenoide carrete válvula con transición cerrada
  • DNDA 4-vías, 2-posiciones , direccional, operada por solenoide carrete válvula
  • DNDAS 4-vías, 2-posiciones , cambio suave , direccional, operada por solenoide carrete válvula
  • DNDC 4-vías, 3-posiciones, direccional, operada por solenoide carrete válvula
  • DNDY 2-posiciones , 6-vías, direccional, operada por solenoide carrete válvula
  • DNDYS 2-posiciones , 6-vías, cambio suave , direccional, operada por solenoide carrete válvula
  • DTCA
    2-vías , acción-directa , direccional, operada por solenoide blocking disco válvula con superponer
  • HDDA 2-vías , direccional, operada por solenoide disco válvula - después del anti-retorno
  • 991700
    Programador portátil
  • 991702 Infrarrojo adaptador
  • 991704 USB infrarrojo adaptador
Notes [ + ]
  • A source type input is required. A sinking type analog input will damage the amplifier.
Additional Resources [ + ]