Assembly Build Process

Sun's Assembly Build Process allows you to configure a cartridge and manifold, or main stage and pilot stage cartridge, and build a digital assembly in three dimensional space. The resulting output of this process is the assembly product page, including configuration-specific images, symbols, product information and CAD files for download.

The Assembly Build Process can be accessed from either a cartridge or manifold product page. Only valid choices are allowed.

From a manifold page, you must first choose your cartridge function. Once you choose your function, click on the BUILD ASSEMBLY button below the WHERE TO BUY BUTTON. Once clicked, you will be presented with valid cartridges for your manifold. Select the cartridge of your choice and follow the instructions at the top of the page. If your particular combination has been generated before, the resulting assembly page will be available immediately. If not, you will be asked to enter your email address. Once the page is complete, an email will be sent to you including a link to the assembly product page.

From a cartridge product page, click on BUILD ASSEMBLY and you will be presented with a listing of compatible manifolds. In the case of main stage and pilot stage cartridges, you can either build a cartridge to cartridge assembly or a cartridge to manifold assembly. Once your choice has been made, follow the instructions at the top of the page. If your particular combination has been generated before, the resulting assembly page will be available immediately. If not, you will be asked to enter your email address. Once the page is complete, an email will be sent to you including a link to the assembly product page.

Please note that the Assembly Build Process is an automated process. It can be utilized at any time. Pages are generated typically within minutes but delays can occasionally be expected. In the event of a delay, a team at Sun will work to resolve the issue to ensure you receive your information as quickly as possible.

XMD Series, Serie 770 coil clip

Expand All

Technical Features [ + ]

This coil clip is designed to attach Sun's XMD Series Driver to the 770 Series coils. Because it is compatible with the existing 770 series nut, no additional hardware is required.

Used With [ + ]

What models can this kit be used with?

770212 12 VDC bobina con ISO/DIN 43650, Form A conector con TVS Diode
770214 14 VDC bobina con ISO/DIN 43650, Form A conector con TVS Diode
770214N 14 VDC bobina con ISO/DIN 43650, Form A conector without TVS Diode
770224 24 VDC bobina con ISO/DIN 43650, Form A conector con TVS Diode
770224N 24 VDC bobina con ISO/DIN 43650, Form A conector
770228 28 VDC bobina con ISO/DIN 43650, Form A conector con TVS Diode
770912 12 VDC bobina con Deutsch DT04-2P conector con TVS Diode
770914 14 VDC bobina con Deutsch DT04-2P conector con TVS Diode
770914N 14 VDC bobina con Deutsch DT04-2P conector without TVS Diode
770924 24 VDC bobina con Deutsch DT04-2P conector con TVS Diode
770924N 24 VDC bobina con Deutsch DT04-2P conector without TVS Diode
770928 28 VDC bobina con Deutsch DT04-2P conector con TVS Diode

Notes [ + ]

This coil clip attaches to both 740 Series high-power and 770 Series coils. For 740 Series high-power coil, purchase kit 991-740-001 which includes required coil nut, o-ring, and seal.

Additional Resources [ + ]

Realces

Technical Information

Environmental Test Specification for Electrical and Electronic Co (254.61 KB)
Sun's Floating Style Screw-In Cartridge (1.06 MB)
XMD Coil Clip Installation Guide (749.23 KB)
Electro-Hydraulic Solutions (3 MB)
CANpoint Quick Start Guide (3.6 MB)
CE Declaration of Conformity - XMD 12-2017 (133.69 KB)
XMD Mobile App User Guide (10.31 MB)

Literature

XMD Accessories Chart (386.7 KB)

991770001 | Electrónica » I/O Modules » Accesorios | Sun Hydraulics

Assembly Build Process

Assembly Build Process

XMD Series, Serie 770 coil clip

Footer