Filtro

Capacidad: 40 gpm160 L/min. | Cavidad: T-16A
FLHA : Filtro
Technical Features [ + ]

Sun filter elements are available as Surface Type (Last Chance) and Depth Style elements. The flow path is Port 2 to Port 1 and should not be used in reverse, even with a reverse free flow check valve installed. The elements have a high collapse pressure and are intended to be used in line with the system. Filter life will depend on initial system cleanliness and the amount of dirt ingression to the system when operating.

  • Differential crush pressure is 3000 psid (210 bar).
  • The flow path is Port 2 to Port 1 only.
  • Installation directly above the subplate will protect the entire valve stack from particles.
  • Cartridges configured with EPDM seals are for use in systems with phosphate ester fluids. Exposure to petroleum based fluids, greases and lubricants will damage the seals.
  • Surface type element features a 304 stainless steel mesh media. All internal components are 304 stainless steel.
  • Surface Type elements have a 40 micron nominal rating (63 micron absolute).
  • Surface Type elements are designed to capture errant particles that may not be trapped in the main system filter or particles resulting from a component failure.
  • With a correctly assembled system, Surface Type elements will be unnoticed during regular operation, but will provide protection from sudden component failure.
  • Surface Type (Last Chance) elements have a single layer stainless steel mesh supported by perforated sheet tube.
  • Depth Type elements feature a pleated microglass media with clear zinc coated components.
  • Depth type elements are available in 1 µm, 3 µm, 10 µm, and 25 µm nominal ranges.
  • 1, 3, 10, and 25 micron elements have a Beta ratio as shown in the Performance Curves tab.
Technical Data [ + ]
Notar: Los datos pueden variar según la configuración . Consulte la sección de CONFIGURATION
cavidad T-16A
Series 3
Capacity 40 gpm160 L/min.
Maximum Operating Pressure 5000 psi350 bar
Valve Hex Size 1 1/4 in.31,8 mm
Valve Installation Torque 150 - 160 lbf ft203 - 217 Nm
Seal kit - Cartridge Buna: 990016007
Seal kit - Cartridge EPDM: 990016014
Seal kit - Cartridge Polyurethane: 990016002
Seal kit - Cartridge Viton: 990016006
Performance Curves [ + ]
FAQs [ + ]

There are exactly 250 Sun drops in a cubic inch or 15 in a cc.

Only external seals are serviceable.  Sun offers replacement seal kits for all cartridge models. The applicable kit part number can be found in the product page's Technical Data table or by using our Cartridge Seal Kit search function located under Accessories. Please note: Converting the external seals from one material to another does not ensure fluid compatibility with that material due to the existence of internal seals within the cartridge.
Notes [ + ]
  • Capacity rating is dependent on the micron rating of the element. Stated flow capacity in the Technical Data table is based on the 40 micron rating. See performance curves.
  • See Related Accessories for replacement elements.
Additional Resources [ + ]