Value Series, 24 VDC coil with twin leads

780724N : Value Series, 24 VDC coil with twin leads
Technical Features [ + ]
  • This DC coil does not include a TVS surge suppression diode. Coils without TVS diodes should only be used when surge suppression is included elsewhere in the electrical system.
  • The coil is magnetically symmetrical and can be mounted in either direction on the solenoid tube without affecting performance.
  • Constructed of overmolded plastic with clear trivalent, zinc plated flux cage.
  • Duty rating: +/- 10% Nominal Voltage, Continuous Duty
  • IP rating is dependent on the coil connector and the mating connector used.
  • Power cable with mating connector is required and is not included with product.
Technical Data [ + ]
Maximum Coil Temperature at 68ºF (20ºC) Ambient 218ºF (105ºC)218ºF (105ºC)
Arc Suppression (TVS) NoneNone
Power Consumption (cold) - at rated voltage 22 watts22 watts
Maximum Ambient Temperature 122 °F50 °C
Voltage/Frequency 24 VDC24 VDC
Operating Voltage Range +/- 10% nominal+/- 10% nominal
Duty Cycle Rating 100 %100 %
Connector Twin lead 18 AWG x 24 in. (610 mm)Twin lead 18 AWG x 24 in. (610 mm)
Connector Environment Rating IP65IP65
Solenoid Tube Diameter .50 in.12,7 mm
Coil Nut Torque 4.5 lbf in.0,5 Nm
Used With [ + ]

What models can this kit be used with?

  • DLDB Value Series, 2-way, solenoid-operated directional spool valve - 3600 psi (250 bar)
  • DMDB Value Series, 3-way, solenoid-operated directional spool valve - 3600 psi (250 bar)
  • DNDB Value Series, 4-way, 2-position, solenoid-operated directional spool valve - 3600 psi (250 bar)
  • DTDB Value Series, 2-way, solenoid-operated directional poppet - valve 3600 psi (250 bar)
  • DWDB Value Series, 3-way, direct-acting, solenoid-operated directional poppet valve - 3600 psi (250 bar)
Notes [ + ]
  • 780 series coils are designed for use with the Value Series line of solenoid operated valves (3600 psi - 250 bar rated) only and are not interchangeable with other Sun coils.
Additional Resources [ + ]