Momentary/twist operation, manual override control kit, T control

The momentary/twist manual override is a rotary, hand-actuated device for use on Sun's full flow solenoid valves and certain Series P models. The hand knob is constructed of a reinforced plastic for durability, heat resistance and stability in varying environmental conditions and is suitable for operation with a gloved hand. The override assembly incorporates a sealed-construction design thereby preventing the introduction of debris and other damaging contamination. Once installed on a Sun solenoid valve, the override feature allows the operator to manually shift the de-energized valve. Solenoid cartridges may be ordered in this configuration by specifying a "T" control in the cartridge model number. Sun kits for field conversion are also available. Please note that valves with the momentary/twist manual override are not suitable for load holding applications.

• The momentary/twist override option "T" allows the operator to momentarily shift the valve by twisting the manual override clockwise and releasing. Once released, the valve returns to its de-energized position.
• The manual control assembly has a mechanical life expectancy of approximately 7,000 cycles.

What models can this kit be used with?

• DAAL
  2-way, solenoid-operated directional spool valve - pilot capacity
• DAAM 2-way, manually operated, spool directional valve - pilot capacity
• DBAL
  3-way, solenoid-operated directional spool valve - pilot capacity
• DBAM 3-way, manually operated, spool directional valve - pilot capacity
• DFCA
  2-way, 2-stage, solenoid-operated directional poppet valve - flow 1-2
• DFCB
  2-way, 2-stage, solenoid-operated directional poppet valve - flow 2-1
• DFDA
  2-way, 2-stage, solenoid-operated directional poppet valve - flow 1-2
• DFDB
  2-way, 2-stage, solenoid-operated directional poppet valve - flow 2-1
• DFEA
  2-way, 2-stage, solenoid-operated directional poppet valve - flow 1-2
• DFEB
  2-way, 2-stage, solenoid-operated directional poppet valve - flow 2-1
• DFFA
  2-way, 2-stage, solenoid-operated directional poppet valve - flow 1-2
• DFFB
  2-way, 2-stage, solenoid-operated directional poppet valve - flow 2-1
• DLDA
  2-way, solenoid-operated directional spool valve
• DLDM 2-way, manually operated, directional spool valve
• DMDA 3-way, solenoid-operated directional spool valve
• DMDM 3-way, manually operated, directional spool valve
• DNCA 4-way, 2-position, solenoid-operated directional spool valve with closed transition
• DNDA 4-way, 2-position, solenoid-operated directional spool valve
• DNDM 4-way, manually operated, directional spool valve
• DNDY 2-position, 6-way, solenoid-operated directional spool valve
• DNDYS 2-position, 6-way, soft shift, solenoid-operated directional spool valve
• DTCA
  2-way, direct-acting, solenoid-operated directional blocking poppet valve with overlap
• DTCM 2-way, manually operated, directional poppet valve with overlap
• DTDA
  2-way, direct-acting, solenoid-operated directional blocking poppet valve
• DTDM 2-way, manually operated, directional poppet valve
• DWDA
  3-way, direct-acting, solenoid-operated directional poppet valve
• DWDM 3-way, manually operated, directional poppet valve
• FMDA Electro-proportional 3-way flow control valve, meter in
• FMDB Electro-proportional 3-way flow control valve, meter in
• FPCC Electro-proportional flow control valve - normally closed
• FPCH Electro-proportional flow control valve - normally open
• HDDA 2-way, solenoid-operated directional poppet valve - after check

• Ensure o-ring is installed in bottom of the manual override assembly.
• Remove existing coil nut from end of solenoid tube.
• Thread the manual override assy on to the end of the solenoid tube. Point coil connector in desired position before hand tightening the manual override assy.
• Note: Thread lock may be used if anticipated conditions warrant.

• Sun’s Maximum Setting Limiter

• Sun's Floating Style Screw-In Cartridge (1.06 MB)