T-10A插孔 至 T-8A插孔 转换器 带过滤网

流量: | 插孔: T-10A
XFAB : T-10A插孔 至 T-8A插孔 转换器 带过滤网
技术特性 [ + ]

当装在Sun的T-10A孔型中时,可转换成Sun的T-8A孔型,并且1口和2口带滤网

  • 配置EPDM的插装阀用于磷酸酯油液压系统。该密封若暴露在石油基液压油或润滑油,润滑脂中,将会被损坏。
技术数据 [ + ]
注意:技术参数可能因产品配置而不同。请查看产品配置部分。
插孔 T-10A
系列 1
最大操作压力 5000 psi350 bar
先导控制孔型 T-8AT-8A
阀头部安装六角尺寸 7/8 in.22,2 mm
阀安装扭矩 30 - 35 lbf ft41 - 47 Nm
Seal kit - Cartridge Buna: 990010007
Seal kit - Cartridge EPDM: 990010014
Seal kit - Cartridge Polyurethane: 990010002
Seal kit - Cartridge Viton: 990010006
常见问题 [ + ]

There are exactly 250 Sun drops in a cubic inch or 15 in a cc.

Only external seals are serviceable.  Sun offers replacement seal kits for all cartridge models. The applicable kit part number can be found in the product page's Technical Data table or by using our Cartridge Seal Kit search function located under Accessories. Please note: Converting the external seals from one material to another does not ensure fluid compatibility with that material due to the existence of internal seals within the cartridge.
额外来源 [ + ]