740 Series operación doble de girar/bloquear, activador manual juego de control, control D

991285 : 740 Series operación doble de girar/bloquear, activador manual juego de control, control D
Technical Features [ + ]

The dual manual override is a rotary, hand-actuated device for use on Sun's (full flow solenoid valves and FLeX series valves). The hand knob is constructed of a reinforced plastic for durability, heat resistance, and stability in varying environmental conditions and is suitable for operation with a gloved hand. The override assembly incorporates a sealed-construction design thereby preventing the introduction of debris and other damaging contamination. Once installed on a Sun solenoid valve, the override feature allows the operator to manually shift the de-energized valve. Solenoid cartridges may be ordered in this configuration by specifying a "D" control in the cartridge model number. Sun kits for field conversion are also available. Please note that valves with the dual manual override are not suitable for load holding applications.

  • The dual operation override option "D" allows the operator to either shift momentarily by turning clockwise or place it in the detent postion by turning counter-clockwise.
  • The manual control assembly has a mechanical life expectancy of approximately 7,000 cycles.
  • For proper operation of the twist-type manual overrides, it is important to grasp the cap fully before turning.
Technical Data [ + ]
Material Black plastic and aluminumBlack plastic and aluminum
Description Dual (Twist/Lock) Operation (Option D)Dual (Twist/Lock) Operation (Option D)
Operating Torque 15 lbf in.15 lbf in.
Used With [ + ]

What models can this kit be used with?

  • DBAF 3-vías direccional, operada por solenoide carrete válvula - capacidad de pilotaje (740 Series)
  • DFBD FLeX Series 2-vías , 2-stage, direccional, operada por solenoide disco válvula con anti-retorno de caudal inverso - caudal 2-1, 3000 psi (210 bar)
  • DFBE FLeX Series 2-vías , 2-stage, direccional, operada por solenoide disco válvula con anti-retorno de caudal inverso - caudal 2-1, 3000 psi (210 bar)
  • DFBF FLeX Series 2-vías , 2-stage, direccional, operada por solenoide disco válvula con anti-retorno de caudal inverso - caudal 2-1
  • DFBG FLeX Series 2-vías , 2-stage, direccional, operada por solenoide disco válvula con anti-retorno de caudal inverso - caudal 2-1
  • DLDF 2-vías , direccional, operada por solenoide carrete válvula (740 Series)
  • DTAF FLeX Series 2-vías , acción-directa , direccional, operada por solenoide blocking disco válvula
  • DTBF FLeX Series 2-vías , acción-directa , direccional, operada por solenoide blocking disco válvula
  • DTDF 2-vías , acción-directa , direccional, operada por solenoide blocking disco válvula (740 Series)
  • DWBF FLeX Series 3-vías, acción-directa , direccional, operada por solenoide blocking disco válvula
  • DWDF 3-vías, acción-directa , direccional, operada por solenoide disco válvula (740 Series)
Notes [ + ]
  • Ensure o-ring is installed in bottom of the manual override assembly.
  • Remove existing coil nut from end of solenoid tube.
  • Thread the manual override assy on to the end of the solenoid tube. Point coil connector in desired position before hand tightening the manual override assy.
  • Note: Thread lock may be used if anticipated conditions warrant.
Additional Resources [ + ]