2-vías , pilot-shifted, doble trayectoria, proporcional estrangulación

Capacidad: 15 gpm60 L/min. | Cavidad: T-52AD
FTCA : 2-vías , pilot-shifted, doble trayectoria, proporcional estrangulación
Technical Features [ + ]

This valve is a 2-way, 2-position proportional throttle. Ports 2 and 3 are normally closed. Pilot pressure at port 1 opposes the spring and creates a variable metering orifice between port 2 and 3 that is proportional to the pressure at 1. The force balance of the flow forces, spring and pilot pressure results in a degree of partial self-compensation as the load pressure changes.

Pressure at port 4 directly opposes pressure at port 1.

The valve uses a dual-path design. Ports 2 and 3 incorporate a double-port area.

  • These valves may be pressure compensated by an external, modulating, logic element. Use LR_C-XHN for a bypass circuit or LP_C-XHN for a restrictive circuit.
  • The valve provides a degree of self-compensation and may be used as a flow control. To increase the accuracy of flow control, an external, modulating, logic element can be used to maintain a constant flow over a wider range of flows and pressures. See performance curves for additional information.
  • The optional L control is a stroke adjustment that limits maximum flow.
  • Ports 1 and 4 should be limited to 500 psi (35 bar).
  • Pressure at port 4 directly opposes pressure at port 1.
  • Accurate pressure compensated control requires that a constant pressure differential be maintained across the valve.
  • Incorporates the Sun floating style construction to minimize the possibility of internal parts binding due to excessive installation torque and/or cavity/cartridge machining variations.
Technical Data [ + ]
Notar: Los datos pueden variar según la configuración . Consulte la sección de CONFIGURATION
cavidad T-52AD
Series 2
Capacity 15 gpm60 L/min.
Maximum Operating Pressure 5000 psi350 bar
Pilot Pressure Required to Shift Valve 60 - 130 psi4 - 9 bar
Pilot Pressure Required for Full Shift at Rated Flow 290 - 340 psi20 - 23 bar
Maximum Valve Leakage at 110 SUS (24 cSt) 5 in³/min.@1000 psi80 cc/min.@70 bar
Pilot Volume Displacement .05 in³0,82 cc
Adjustment - No. of CCW Turns from Fully Closed to Fully Open 55
Hysteresis 35 %35 %
Valve Hex Size 1 1/8 in.28,6 mm
Valve Installation Torque 45 - 50 lbf ft61 - 68 Nm
Adjustment Screw Internal Hex Size 5/32 in.4 mm
Locknut Hex Size 9/16 in.15 mm
Locknut Torque 80 - 90 lbf in.9 - 10 Nm
Model Weight 1.00 lb0,45 kg
Seal kit - Cartridge Buna: 990152007
Seal kit - Cartridge Viton: 990152006
Performance Curves [ + ]
FAQs [ + ]

There are exactly 250 Sun drops in a cubic inch or 15 in a cc.

Only external seals are serviceable.  Sun offers replacement seal kits for all cartridge models. The applicable kit part number can be found in the product page's Technical Data table or by using our Cartridge Seal Kit search function located under Accessories. Please note: Converting the external seals from one material to another does not ensure fluid compatibility with that material due to the existence of internal seals within the cartridge.
Notes [ + ]
  • When installed in Sun's standard T-52A line mount manifold, plug unused ports and expect higher pressure drops.
Additional Resources [ + ]