747 Series, 24 VCC hazardous location bobine avec 180 Deg M20 x 1.5 Connecteur - ATEX, IECEx, CSA

747JM24BD : 747 Series, 24 VCC hazardous location bobine avec 180 Deg M20 x 1.5 Connecteur - ATEX, IECEx, CSA
Caractéristiques techniques [ + ]

Model 747 Series hazardous location coils are designed for Sun's FLeX Series switching and proportional solenoid valves and for newer Sun valves that use the 16-mm actuator tubes. All models include ATEX, IECEx, and NEC, CEC/CSA certifications.

  • Cette bobine est conforme aux normes CE. (Voir les Ressources Additionnelles dans les onglets ci-dessous)
  • Conforme à RoHS. Les matières dont l'usage est restreint représentent moins de 0,1% du total en poids.
  • All hazardous location coils are certified for gas and dust environments (T4 compliant for gas and T135° C for dust).
  • IP66 rating (with suitable certified cable entry or conduit per IEC 60529).
  • Includes vibration-resistant push-to-connect terminal block. Power cable with mating connector is required and not included with this product.
  • The external steel shell is zinc-nickel plated (1000-hour salt fog protection).
  • Fin-free design prevents build up of grease, dust and debris.
  • The coil is magnetically symmetrical and can be mounted in either direction on the solenoid tube without affecting performance.
  • A TVS surge suppression diode is built in and offers a 48-Vdc breakdown voltage.
  • For optimum performance when used on a proportional valve, an amplifier with current feedback and adjustable dither should be used. Dither should be adjustable between 80-250 Hz.
  • See "Related Information" for Certification information, or click Full Data Sheet above to download complete details.
Caractéristiques [ + ]
Plage de Température de fonctionnement -40 to 158 °F-40 to 70 °C
Dégagement Cylindrique Requis pour la Bobine 2,36 in.59,4 mm
Fluid Temperature Through Valve (Maximum) 158 °F70 °C
Corrosion Resistance (ASTM B117, ISO 9227 5% saline) 1000 hours salt fog (zinc-nickel)1000 hours salt fog (zinc-nickel)
Tension / Fréquence 24 VDC (-15%/+0%)24 VDC (-15%/+0%)
Facteur de service 100 %100 %
Connecteur M20 x 1.5 female connectorM20 x 1.5 female connector
Diamètre du Doigt de Gant 0,63 in.16 mm
Couple de Serrage de l'Ecrou de la Bobine 4,5 lbf in.0,5 Nm
Poids du composant 1,80 lb0,80 kg
IP Rating IP66 (with suitable cable entry/conduit)IP66 (with suitable cable entry/conduit)
Used With [ + ]

What models can this kit be used with?

  • DBAF 3 Voies électro distributeur à tiroir Valve - capacité de pilotage (740 Series)
  • DFBD FLeX Series 2 Voies, 2-stage, électro distributeur Clapet Valve avec Clapet de By-Pass - flow 2-1, 3000 psi (210 bar)
  • DFBE FLeX Series 2 Voies, 2-stage, électro distributeur Clapet Valve avec Clapet de By-Pass - flow 2-1, 3000 psi (210 bar)
  • DFBF FLeX Series 2 Voies, 2-stage, électro distributeur Clapet Valve avec Clapet de By-Pass - flow 2-1
  • DFBG FLeX Series 2 Voies, 2-stage, électro distributeur Clapet Valve avec Clapet de By-Pass - flow 2-1
  • DFCI 2 Voies, 2-stage, électro distributeur Clapet Valve - flow 1-2 (740 Series)
  • DLDF 2 Voies, électro distributeur à tiroir Valve (740 Series)
  • DMBD FLeX Series 3 Voies, électro distributeur à tiroir Valve - 3000 psi (210 bar)
  • DMBF FLeX Series 3 Voies, électro distributeur à tiroir Valve
  • DNBD FLeX Series 4 voies , 2 Positions, électro distributeur à tiroir Valve - 3000 psi (210 bar)
  • DNBF FLeX Series 4 voies , 2 Positions, électro distributeur à tiroir Valve
  • DTAF FLeX Series 2 Voies, à action directe, électro distributeur blocking Clapet Valve
  • DTBF FLeX Series 2 Voies, à action directe, électro distributeur blocking Clapet Valve
  • DTDF 2 Voies, à action directe, électro distributeur blocking Clapet Valve (740 Series)
  • DWBF FLeX Series 3 Voies, à action directe, électro distributeur blocking Clapet Valve
  • DWDF 3 Voies, à action directe, électro distributeur Clapet Valve (740 Series)
  • FPBF FLeX Series pilot-operated, Normalement Fermé, électro-proportionnel Étrangleur - flow 2-1
  • FPBG FLeX Series pilot-operated, Normalement Fermé, électro-proportionnel Étrangleur avec Clapet de By-Pass - flow 2-1
  • FPBI FLeX Series pilot-operated, Normalement Ouvert , électro-proportionnel Étrangleur - flow 2-1
  • FPBJ FLeX Series pilot-operated, Normalement Ouvert , électro-proportionnel Étrangleur avec Clapet de By-Pass - flow 2-1
  • FPBU FLeX Series électro-proportionnel, blocking Clapet Étrangleur - Normalement Fermé
  • RVCK FLeX Series 2-stage, solenoid-operated réglable limiteur de pression Valve, normally vented
  • RVCL FLeX Series 2-stage, solenoid-operated réglable limiteur de pression Valve, energize to vent
  • RVCM FLeX Series 2-stage, solenoid-operated réglable limiteur de pression Valve, energize to block
  • RVCN FLeX Series 2-stage, solenoid-operated réglable limiteur de pression Valve, normally blocked
  • 991711300 XMD Series, 12-pin Deutsch prototype câble, single-output - 3M
  • 991711600 XMD Series, 12-pin Deutsch prototype câble, single-output - 6M
  • 991712300 XMD Series, 12-pin Deutsch prototype câble, double-output - 3M
  • 991712600 XMD Series, 12-pin Deutsch prototype câble, double-output - 6M
  • XMD-01 Configurable single-output driver used avec proportionnel et solenoid-operated switching valves
  • XMD-02 Configurable double-output driver used avec proportionnel et solenoid-operated switching valves
Notes [ + ]
  • 1. Mount coil onto spool (tube) body.
  • 2. A cable entry hole is provided to accommodate any suitable certified flameproof cable entry device. Cable entry temperature may exceed 70° C (158° F).
  • 3. Remove terminal box cover and connect electrical supply and earth to terminal block. Conductors according to Note 4. Note: coil is polarity insensitive. The center terminal is the internal ground. Replace cover and secure with the four screws (M4 x ,7). Torque to min 1.92
  • 4. Connect external ground. North American applications: external earth (ground) connections. Use where local codes or authorities permit or require external earth (ground) connections. Torque to 1.25 ft-lbs (1.7 N-m).
  • 5. When installing with multiple coils, the coils must be spaced a minimum of 0.875" (22.23 mm) apart to ensure adequate heat dissipation.
  • For installation in above-ground electrical systems in explosive atmospheres, procedures for all applicable codes must be observed. All work must be carried out by an electrician with adequate qualifications for hazardous locations.
  • Sun's 747 Series hazardous location coil requires more clearance than the FLeX 740 series coil. Sun manifolds with more than one cavity may not allow enough clearance for these coils. An additional 2.00” (50,8 mm) beyond the valve extension is needed for coil installation
Ressources Complémentaires [ + ]