740 Series, 14 VDC, high-power coil with ISO/DIN 43650, Form A connector without TVS Diode

740214 : 740 Series, 14 VDC, high-power coil with ISO/DIN 43650, Form A connector without TVS Diode
Technical Features [ + ]
  • Coil windings utilize Class N, (392° F [200 °C] rated) magnet wire.
  • Power cable with mating connector is required and is not included with the coil.
  • The coil is magnetically symmetrical and can be mounted on the solenoid tube in either direction for best cable access without affecting performance.
  • Coil is fully RoHS compliant. Restricted materials less than 0.1% total by weight.
  • The external steel shell is zinc-nickel plated and provides 1000-hour salt fog protection.
  • For optimum proportional performance, an amplifier with current sensing and adjustable dither should be used. Dither should be adjustable between 100 - 250 Hz.
  • IP rating for this coil is IP65/IP67.
  • This coil does not include a transient voltage suppression (TVS) diode and should only be used when surge suppression is included elsewhere in the electrical system. If no surge suppression is included in the circuit, the coil version with TVS diode should be used.
Technical Data [ + ]
Operating Temperature Range -22 to 230 °F-30 to 110 °C
Arc Suppression (TVS) NoneNone
Power Consumption (cold) - at rated voltage 25 Watts25 Watts
Maximum Ambient Temperature 122 °F50 °C
Voltage/Frequency 14 VDC14 VDC
Operating Voltage Range +10%/-15%+10%/-15%
Duty Cycle Rating 100 %100 %
Connector ISO4400 - EN/DIN175301-803, Form A (ISO/DIN 43650) 3-pinISO4400 - EN/DIN175301-803, Form A (ISO/DIN 43650) 3-pin
Solenoid Tube Diameter .62 in.15,7 mm
Coil Nut Torque 4.5 lbf in.0,5 Nm
Model Weight 9.6 oz.272 grams
Proportional Performance Data [ + ]
Resistance at 20º C 7.8 ohms ±10%7.8 ohms ±10%
Used With [ + ]

What models can this kit be used with?

  • DAAF 2-way, direct-acting, solenoid-operated directional spool valve - pilot capacity
  • DBAF 3-way solenoid-operated directional spool valve - pilot capacity
  • DFBF FLeX Series, 2-way, 2-stage, solenoid-operated directional poppet valve with reverse flow check - flow 2-1
  • DFBG FLeX Series, 2-way, 2-stage, solenoid-operated directional poppet valve with reverse flow check - flow 2-1
  • DLDF 2-way, solenoid-operated directional spool valve
  • DTAF FLeX Series, 2-way, direct-acting, solenoid-operated directional blocking poppet valve
  • DTBF FLeX Series, 2-way, direct-acting, solenoid-operated directional blocking poppet valve
  • DTDF 2-way, direct-acting, solenoid-operated directional blocking poppet valve
  • DWDF 3-way, direct-acting, solenoid-operated directional poppet valve
  • FPBF FLeX Series, pilot operated, normally closed, electro-proportional throttle - flow 2-1
  • FPBG FLeX Series, pilot operated, normally closed, electro-proportional throttle with reverse flow check - flow 2-1
  • FPBI FLeX Series, pilot operated, normally open, electro-proportional throttle - flow 2-1
  • FPBJ FLeX Series, pilot operated, normally open, electro-proportional throttle with reverse flow check - flow 2-1
  • FPBU FLeX Series, electro-proportional, blocking poppet throttle - normally closed
  • 991711300 XMD Series, 12-pin Deutsch prototype cable, single-output - 3M
  • 991711600 XMD Series, 12-pin Deutsch prototype cable, single-output - 6M
  • 991712300 XMD Series, 12-pin Deutsch prototype cable, double-output - 3M
  • 991712600 XMD Series, 12-pin Deutsch prototype cable, double-output - 6M
  • 991713030 XMD Series, 2-pin Deutsch prototype cable - 30CM
  • 991713060 XMD Series, 2-pin Deutsch prototype cable - 60CM
  • 991740001 XMD Series, high-power coil clip kit
  • XMD-01 Configurable single-output driver used with proportional and solenoid-operated switching valves
  • XMD-02 Configurable double-output driver used with proportional and solenoid-operated switching valves
Additional Resources [ + ]