740 Series, 24 VDC, low-power coil with ISO/DIN 43650, Form A connector without TVS Diode

740224L : 740 Series, 24 VDC, low-power coil with ISO/DIN 43650, Form A connector without TVS Diode
Technical Features [ + ]
  • Coil windings utilize Class N, (392° F [200 °C] rated) magnet wire.
  • Power cable with mating connector is required and is not included with the coil.
  • The coil is magnetically symmetrical and can be mounted on the solenoid tube in either direction for best cable access without affecting performance.
  • Coil is fully RoHS compliant. Restricted materials less than 0.1% total by weight.
  • The external steel shell is zinc-nickel plated and provides 1000-hour salt fog protection.
  • For optimum proportional performance, an amplifier with current sensing and adjustable dither should be used. Dither should be adjustable between 100 - 250 Hz.
  • IP rating for this coil is IP65/IP67.
  • This coil does not include a transient voltage suppression (TVS) diode and should only be used when surge suppression is included elsewhere in the electrical system. If no surge suppression is included in the circuit, the coil version with TVS diode should be used.
Technical Data [ + ]
Operating Temperature Range -22 to 230 °F-30 to 110 °C
Arc Suppression (TVS) NoneNone
Power Consumption (cold) - at rated voltage 17 Watts17 Watts
Resistance at 20º C 33.9 ohms ±10%33.9 ohms ±10%
Voltage/Frequency 24 VDC24 VDC
Operating Voltage Range +10%/-15%+10%/-15%
Duty Cycle Rating 100 %100 %
Connector ISO4400 - EN/DIN175301-803, Form A (ISO/DIN 43650) 3-pinISO4400 - EN/DIN175301-803, Form A (ISO/DIN 43650) 3-pin
Solenoid Tube Diameter .62 in.15,7 mm
Coil Nut Torque 4.5 lbf in.0,5 Nm
Model Weight 6.4 oz.181 grams
Used With [ + ]

What models can this kit be used with?

  • DAAF 2-way, direct-acting, solenoid-operated directional spool valve - pilot capacity
  • DBAF 3-way solenoid-operated directional spool valve - pilot capacity
  • DFBD FLeX Series, 2-way, 2-stage, solenoid-operated directional poppet valve with reverse flow check - flow 2-1
  • DFBE FLeX Series, 2-way, 2-stage, solenoid-operated directional poppet valve with reverse flow check - flow 2-1
  • DTAF FLeX Series, 2-way, direct-acting, solenoid-operated directional blocking poppet valve
  • DTBF FLeX Series, 2-way, direct-acting, solenoid-operated directional blocking poppet valve
  • FPBD FLeX Series, pilot operated, normally closed, electro-proportional throttle - flow 2-1 - 3000 psi (210 bar)
  • FPBE FLeX Series, pilot operated, normally closed, electro-proportional throttle with reverse flow check - flow 2-1 - 3000 psi (210 bar)
  • FPBM FLeX Series, pilot operated, normally open, electro-proportional throttle - flow 2-1 - 3000 psi (210 bar)
  • FPBN FLeX Series, pilot operated, normally open, electro-proportional throttle with reverse flow check - flow 2-1 - 3000 psi (210 bar)
  • 991711300 XMD Series, 12-pin Deutsch prototype cable, single-output - 3M
  • 991711600 XMD Series, 12-pin Deutsch prototype cable, single-output - 6M
  • 991712300 XMD Series, 12-pin Deutsch prototype cable, double-output - 3M
  • 991712600 XMD Series, 12-pin Deutsch prototype cable, double-output - 6M
  • 991713030 XMD Series, 2-pin Deutsch prototype cable - 30CM
  • 991713060 XMD Series, 2-pin Deutsch prototype cable - 60CM
  • 991740002 XMD Series, low-power coil clip kit
  • XMD-01 Configurable single-output driver used with proportional and solenoid-operated switching valves
  • XMD-02 Configurable double-output driver used with proportional and solenoid-operated switching valves
Additional Resources [ + ]