6 VDC coil with ISO/DIN 43650, Form A connector

760206 : 6 VDC coil with ISO/DIN 43650, Form A connector
Technical Features [ + ]
  • Power cable with mating connector is required and is not included with product.
  • Coil windings utilize Class N, (392° F [200 °C] rated) magnet wire.
  • Encapsulating material: Mineral filled, glass fiber reinforced, epoxy molding compound.
  • A metal oxide varistor, SIOV-S07K35, for surge suppression is molded directly into the coil to protect the connected electrical circuits from inductive transients.
  • The coil is magnetically symmetrical and can be mounted in either direction on the solenoid tube without affecting performance.
  • IP rating is dependent on the coil connector and the mating connector used.
  • RoHS compliant. Restricted materials less than 0.1% total by weight.
Technical Data [ + ]
Maximum Coil Temperature at 68ºF (20ºC) Ambient 218ºF (105ºC)218ºF (105ºC)
Arc Suppression (TVS) IncludedIncluded
Power Consumption (cold) - at rated voltage 12 watts12 watts
Voltage/Frequency 6 VDC6 VDC
Operating Voltage Range +/- 20% nominal+/- 20% nominal
Duty Cycle Rating 100 %100 %
Connector ISO4400 - EN/DIN175301-803, Form A (ISO/DIN 43650) 3-pinISO4400 - EN/DIN175301-803, Form A (ISO/DIN 43650) 3-pin
Connector Environment Rating IP65IP65
Solenoid Tube Diameter .56 in.14,2 mm
Coil Nut Torque 4.5 lbf in.0,5 Nm
Used With [ + ]

What models can this kit be used with?

  • DAAA
    2-way, solenoid-operated directional spool valve - pilot capacity
  • DACC 2-way, 2-stage, solenoid-operated directional poppet valve
  • DBAA
    3-way, solenoid-operated directional spool valve - pilot capacity
Additional Resources [ + ]