Series P - T-9A cavity, Polyurethane cartridge seal kit
Technical Features [ + ]
- The shelf life for this cartridge seal kit is ten years from date of purchase. This date will be printed on the kit packaging.
- Polyurethane seals have a higher tensile strength and are more abrasion/extrusion resistant and are well suited for high cycle and high pressure applications.
Technical Data [ + ]
|Valve Hex Size||7/8 in.22,2 mm|
|Valve Installation Torque||20 - 25 lbf ft27 - 33 Nm|
Used With [ + ]
What models can this kit be used with?
- DBAA 3-way, solenoid-operated directional spool valve - pilot capacity
- DBAL 3-way, solenoid-operated directional spool valve - pilot capacity
- DBALS 3-way, soft shift, solenoid-operated directional spool valve - pilot capacity
- XACB All ports blocked cavity plug
- XACBE Port 1 to external port, ports 2 and 3 blocked cavity plug
- XAOB Port 1 to 2 open, port 3 blocked cavity plug
- XAOC Port 1 to 3 open, port 2 blocked cavity plug
Notes [ + ]
- Install back-up rings and O-rings as shown in views.
- When installing continuous back-up rings, use the same technique and the same care used to install O-rings.
- After installing the GLYD® Ring, size it to restore original shape and to prevent damage during cartridge installation.
- When installing cartridge - be sure to torque to recommended value.
- GLYD® Ring is a registered trademark of W. S. Shamban and Co., Los Angeles, CA, USA
Additional Resources [ + ]