Series 1 tamper resistant cover, control kit

991004A00 : Series 1 tamper resistant cover, control kit
Technical Features [ + ]

Sun's tamper resistant cover is a stainless steel cover which press-fits onto the L Control cartridge shoulder. Stainless steel cartridges only may be ordered in this configuration from Sun by specifying a C control in the model number. The pressure setting must be specified at the time of the order and the setting will be stamped on the cartridge hex. Sun kits for replacement parts or field conversion are available.

  • The tamper resistant cover is designed to be a non-removable item. Once removed, it can not be re-assembled to the cartridge.
  • For all Sun cartridges with an L adjustment
Technical Data [ + ]
For Cartridge Models Series 1Series 1
Material Stainless SteelStainless Steel
Cover inside diameter .75 in.19 mm
Length 1.38 in.35,0 mm
Valve Hex Size 7/8 in.22,2 mm
Notes [ + ]
  • Adjust valve to desired setting and tighten locknut.
  • Using an arbor press or a soft hammer, install cover until it seats on cartridge hex (press fit).
Additional Resources [ + ]