Dual twist/lock operation, manual override control kit, D control

991227 : Dual twist/lock operation, manual override control kit, D control
Technical Features [ + ]

The Twist/Lock manual override is a rotary, hand-actuated device for use on Sun's full flow solenoid valves and certain Series P models. The hand knob is constructed of a reinforced plastic for durability, heat resistance and stability in varying environmental conditions and is suitable for operation with a gloved hand. The override assembly incorporates a sealed-construction design thereby preventing the introduction of debris and other damaging contamination. Once installed on a Sun solenoid valve, the override feature allows the operator to manually shift the de-energized valve. Solenoid cartridges may be ordered in this configuration by specifying a "D" control in the cartridge model number. Sun kits for field conversion are also available. Please note that valves with the Twist/Lock manual override are not suitable for load holding applications.

  • The dual operation override option "D" allows the operator to either shift momentarily by turning clockwise or place it in the detent postion by turning counter-clockwise.
  • The manual control assembly has a mechanical life expectancy of approximately 7,000 cycles.
Technical Data [ + ]
Material Black plastic and aluminumBlack plastic and aluminum
Description Dual (Twist/Lock) Operation (Option D)Dual (Twist/Lock) Operation (Option D)
Operating Torque 10 lbf in.1,2 Nm
Used With [ + ]

What models can this kit be used with?

  • DAAL
    2-way, solenoid-operated directional spool valve - pilot capacity
  • DAAM 2-way, manually operated, spool directional valve - pilot capacity
  • DBAL
    3-way, solenoid-operated directional spool valve - pilot capacity
  • DBAM 3-way, manually operated, spool directional valve - pilot capacity
  • DFCA
    2-way, 2-stage, solenoid-operated directional poppet valve - flow 1-2
  • DFCB
    2-way, 2-stage, solenoid-operated directional poppet valve - flow 2-1
  • DFDA
    2-way, 2-stage, solenoid-operated directional poppet valve - flow 1-2
  • DFDB
    2-way, 2-stage, solenoid-operated directional poppet valve - flow 2-1
  • DFEA
    2-way, 2-stage, solenoid-operated directional poppet valve - flow 1-2
  • DFEB
    2-way, 2-stage, solenoid-operated directional poppet valve - flow 2-1
  • DFFA
    2-way, 2-stage, solenoid-operated directional poppet valve - flow 1-2
  • DFFB
    2-way, 2-stage, solenoid-operated directional poppet valve - flow 2-1
  • DLDA
    2-way, solenoid-operated directional spool valve
  • DLDM 2-way, manually operated, directional spool valve
  • DMDA 3-way, solenoid-operated directional spool valve
  • DMDM 3-way, manually operated, directional spool valve
  • DNCA 4-way, 2-position, solenoid-operated directional spool valve with closed transition
  • DNDA 4-way, 2-position, solenoid-operated directional spool valve
  • DNDM 4-way, manually operated, directional spool valve
  • DNDY 2-position, 6-way, solenoid-operated directional spool valve
  • DNDYS 2-position, 6-way, soft shift, solenoid-operated directional spool valve
  • DTCA
    2-way, direct-acting, solenoid-operated directional blocking poppet valve with overlap
  • DTCM 2-way, manually operated, directional poppet valve with overlap
  • DTDA
    2-way, direct-acting, solenoid-operated directional blocking poppet valve
  • DTDM 2-way, manually operated, directional poppet valve
  • DWDA
    3-way, direct-acting, solenoid-operated directional poppet valve
  • DWDM 3-way, manually operated, directional poppet valve
  • FMDA Electro-proportional 3-way flow control valve, meter in
  • FMDB Electro-proportional 3-way flow control valve, meter in
  • FPCC Electro-proportional flow control valve - normally closed
  • FPCH Electro-proportional flow control valve - normally open
  • HDDA 2-way, solenoid-operated directional poppet valve - after check
Notes [ + ]
  • Ensure o-ring is installed in bottom of the manual override assembly.
  • Remove existing coil nut from end of solenoid tube.
  • Thread the manual override assy on to the end of the solenoid tube. Point coil connector in desired position before hand tightening the manual override assy.
  • Note: Thread lock may be used if anticipated conditions warrant.
Additional Resources [ + ]