P to T, manifold T port

Function

Function for FTC: Relief P to T
Relief P to T
Port Designators [ + ]
Modifiers Ports
FTC, /V Ports A, B, P: 1/2" NPTF; Port T: 1/2" NPTF; Gage Port: 1/4" NPTF;
Technical Data [ + ]
Body Type SubplateSubplate
Interface ISO 05ISO 05
Body Features P to T, manifold T portP to T, manifold T port
Open Cavities 11
Cavity T-10A
Port Size 1/2" NPTF1/2" NPTF
FAQs [ + ]

There are exactly 250 Sun drops in a cubic inch or 15 in a cc.

Notes [ + ]
  • This subplate is designed to mount to the top of a reservoir. Tank is an NPTF port to accommodate a down pipe to drop the connection below the oil level. The tank port and mounting holes are supplied with O rings to seal to the mounting surface.
  • Important: Carefully consider the maximum system pressure. The pressure rating of the manifold is dependent on the manifold material, with the port type/size a secondary consideration. Manifolds constructed of aluminum are not rated for pressures higher than 3000 psi (210 bar), regardless of the port type/size specified.
Additional Resources [ + ]