On P, port 3 to T, bottom ports


Function for HRM: Reducing on P
Reducing on P
Function for HRM: Reducing/Relieving on P
Reducing/Relieving on P
Port Designators [ + ]
Modifiers Ports
HRM Ports A, B, P, T: SAE 16; Ports X & Y: SAE 6; Gage Port (Plugged): 1/4" NPTF;
Technical Data [ + ]
Body Type SubplateSubplate
Interface ISO 08ISO 08
Body Features On P, port 3 to T, bottom portsOn P, port 3 to T, bottom ports
Mounting Hole Thread .500-13 UNC - 2B in..500-13 UNC - 2B in.
Mounting Hole Depth .88 in.22,4 mm
Mounting Hole Quantity 66
Open Cavities 11
Cavity T-17A
Port Size SAE 16SAE 16
FAQs [ + ]

There are exactly 250 Sun drops in a cubic inch or 15 in a cc.

Notes [ + ]
  • Important: Carefully consider the maximum system pressure. The pressure rating of the manifold is dependent on the manifold material, with the port type/size a secondary consideration. Manifolds constructed of aluminum are not rated for pressures higher than 3000 psi (210 bar), regardless of the port type/size specified.
Additional Resources [ + ]