747系列, 230 VAC 危险场合 线圈 带180度 M20 x 1.5接头 - ATEX, IECEx, CSA

747JM23BD : 747系列, 230 VAC 危险场合 线圈 带180度 M20 x 1.5接头 - ATEX, IECEx, CSA
技术特性 [ + ]

747系列适用于危险环境的线圈(防爆线圈),专为Sun公司FLeX系列电磁阀以及比例阀,以及后续采用16毫米螺线管的新产品而设计。所有的型号都符合ATEX, IECEx, and NEC, CEC/CSA认证。

  • 此线圈符合CE认证。
  • 符合欧盟RoHS标准。有害成分质量少于0.1%。
  • All hazardous location coils are certified for gas and dust environments (T4 compliant for gas and T135° C for dust).
  • IP66 rating (with suitable certified cable entry or conduit per IEC 60529).
  • Includes vibration-resistant push-to-connect terminal block. Power cable with mating connector is required and not included with this product.
  • The external steel shell is zinc-nickel plated (1000-hour salt fog protection).
  • Fin-free design prevents build up of grease, dust and debris.
  • The coil is magnetically symmetrical and can be mounted in either direction on the solenoid tube without affecting performance.
  • AC coils are internally rectified.
  • See "Related Information" for Certification information, or click Full Data Sheet above to download complete details.
技术数据 [ + ]
运行温度范围 -40 to 158 °F-40 to 70 °C
线圈直径要求的空隙 2.36 in.59,4 mm
通过阀的流体温度(最大) 158 °F70 °C
防腐蚀 (ASTM B117, ISO 9227 5%生理盐水) 1000 hours salt fog (zinc-nickel)1000 hours salt fog (zinc-nickel)
Power Consumption at 68°F (20°C) cold - at rated voltage 30 watts30 watts
电压/频率 230 VAC 50/60 Hz (-15%/+0%)230 VAC 50/60 Hz (-15%/+0%)
寿命测试等级 100 %100 %
接头 M20 x 1.5 female connectorM20 x 1.5 female connector
衔铁直径 .63 in.16 mm
线圈锁紧螺母扭矩 4.5 lbf in.0,5 Nm
型号重量 1.80 lb0,80 kg
IP等级 IP66 (with suitable cable entry/conduit)IP66 (with suitable cable entry/conduit)
适用于 [ + ]

What models can this kit be used with?

  • DBAF 3通 电磁滑阀换向阀 - 先导流量 (740系列)
  • DBAFS 3通, 软切换, 电磁滑阀换向阀 - 先导流量 (740系列)
  • DFBD FLeX系列 2通, 2级, 电磁锥阀换向阀 带反向单向阀 - 流量 2到1, 3000 psi (210 bar)
  • DFBE FLeX系列 2通, 2级, 电磁锥阀换向阀 带反向单向阀 - 流量 2到1, 3000 psi (210 bar)
  • DFBF FLeX系列 2通, 2级, 电磁锥阀换向阀 带反向单向阀 - 流量 2到1
  • DFBG FLeX系列 2通, 2级, 电磁锥阀换向阀 带反向单向阀 - 流量 2到1
  • DFCI 2通, 2级, 电磁锥阀换向阀 - 流量 1到2 (740系列)
  • DFCJ 2通, 2级, 电磁锥阀换向阀 - 流量 2到1 (740系列)
  • DFDI 2通, 2级, 电磁锥阀换向阀 - 流量 1到2 (740系列)
  • DFDJ 2通, 2级, 电磁锥阀换向阀 - 流量 2到1 (740系列)
  • DFEI 2通, 2级, 电磁锥阀换向阀 - 流量 1到2 (740系列)
  • DFEJ 2通, 2级, 电磁锥阀换向阀 - 流量 2到1 (740系列)
  • DFFI 2通, 2级, 电磁锥阀换向阀 - 流量 1到2 (740系列)
  • DFFJ 2通, 2级, 电磁锥阀换向阀 - 流量 2到1 (740系列)
  • DLDF 2通, 电磁滑阀换向阀 (740系列)
  • DLDFS 2通, 软切换, 电磁滑阀换向阀 (740系列)
  • DMBD FLeX系列 3通, 电磁滑阀换向阀 - 3000 psi (210 bar)
  • DMBF FLeX系列 3通, 电磁滑阀换向阀
  • DNBD FLeX系列 2位4通, 电磁滑阀换向阀 - 3000 psi (210 bar)
  • DNBF FLeX系列 2位4通, 电磁滑阀换向阀
  • DTAF FLeX系列 2通, 直动式, 电磁锥阀换向阀
  • DTAFS FLeX系列 2通, 软切换, 电磁锥阀换向阀 - 先导流量
  • DTBF FLeX系列 2通, 直动式, 电磁锥阀换向阀
  • DTCF 2通, 直动式, 电磁锥阀换向阀 带遮盖 (740系列)
  • DTDF 2通, 直动式, 电磁锥阀换向阀 (740系列)
  • DTDFS 2通, 直动式, 软切换, 电磁锥阀换向阀 (740系列)
  • DWBF FLeX系列 3通, 直动式, 电磁锥阀换向阀
  • DWDF 3通, 直动式, 电磁锥阀换向阀 (740系列)
  • FDEP 2通, 直动式 电比例, 压力补偿 流量控制阀 带反向单向阀
  • FMDF 电比例 3通 流量控制 阀, 进口节流 (740系列)
  • FMDG 电比例 3通 流量控制 阀, 进口节流 (740系列)
  • FREP FLeX系列 3通, 直动式, 电比例, 旁路/节流, 优先流量控制阀
  • PRDF 电比例, 直动式, 减压/溢流阀 带开式过渡位 (740系列)
  • PRDG 电比例, 直动式, 减压/溢流 阀 (740系列)
  • RPEI 电比例 溢流阀 - 无命令时最高压力设定
  • RVCK FLeX系列 2级, 电磁操作 可调式 溢流阀, 常泄
  • RVCL FLeX系列 2级, 电磁操作 可调式 溢流阀, 通电泄油
  • RVCM FLeX系列 2级, 电磁操作 可调式 溢流阀, 通电关闭
  • RVCN FLeX系列 2级, 电磁操作 可调式 溢流阀, 常闭
备注 [ + ]
  • 1. Mount coil onto spool (tube) body.
  • 2. A cable entry hole is provided to accommodate any suitable certified flameproof cable entry device. Cable entry temperature may exceed 70° C (158° F).
  • 3. Remove terminal box cover and connect electrical supply and earth to terminal block. Conductors according to Note 4. Note: coil is polarity insensitive. The center terminal is the internal ground. Replace cover and secure with the four screws (M4 x ,7). Torque to min 1.92
  • 4. Connect external ground. North American applications: external earth (ground) connections. Use where local codes or authorities permit or require external earth (ground) connections. Torque to 1.25 ft-lbs (1.7 N-m).
  • 5. When installing with multiple coils, the coils must be spaced a minimum of 0.875" (22.23 mm) apart to ensure adequate heat dissipation.
  • A common practice to protect the internal bridge rectifier from unknown incoming voltage conditions is to install a TVS diode. For the 115-Vac coil, diode part number, 1.5KE250CA is recommended; for the 230-Vac coil, diode part number 1.5KE400CA is recommended. Depending on the application, diodes higher than 1500 W are recommended.
  • For installation in above-ground electrical systems in explosive atmospheres, procedures for all applicable codes must be observed. All work must be carried out by an electrician with adequate qualifications for hazardous locations.
  • Sun's 747 Series hazardous location coil requires more clearance than the FLeX 740 series coil. Sun manifolds with more than one cavity may not allow enough clearance for these coils. An additional 2.00” (50,8 mm) beyond the valve extension is needed for coil installation
额外来源 [ + ]