ISO 05 X及Y, 欧标 叠加式 阀块 定位 和 丁晴橡胶 密封组件

990120012 : ISO 05 X及Y, 欧标 叠加式 阀块 定位 和 丁晴橡胶 密封组件
技术特性 [ + ]

Sun的ISO 05 X,Y叠加阀根据美国、欧洲不同的泄漏口位置是带有先导口的,有两种不同的密封挡板可提供。这种ISO 05 X,Y CETOP的密封挡板只是针对欧洲制造的方向阀使用。单独的挡板、密封圈以及组合备件都可以进行订货.

  • 所有的Sun的密封板都是符合当前的标准,包括流道和安装孔位置。
  • ISO 05 X,Y的叠加阀只能一个方向旋转,所以在旋转的过程中,“A”和“B”流道是会互换,但是“P”“T”,“X”和“Y”流道保持不变。
  • Sun的ISO 05 X和Y叠加阀不管在美国还是欧洲生产,都包含泄流和先导流道。这里密封挡板必须制定,需要单独订货,以保证选用合适的组件。
  • 可与Rexroth (WEH 10)和Bosch的阀一起使用。
技术数据 [ + ]
密封材料 丁腈橡胶丁腈橡胶
材料 Zinc Plated SteelZinc Plated Steel
平板厚度 .050 in.1,27 mm
适用于 [ + ]

What models can this kit be used with?

  • YDEL 压力感应 再生 安装组件
  • YFEX 旁通/限流, priority flow control with reverse flow check 安装组件
  • YFEY 旁通/限流, priority flow control with reverse flow check 安装组件
  • BJ2 ISO 05 - X&Y: Reducer on A with reverse flow check
  • BJ3 ISO 05 - X&Y: Reducer on B with reverse flow check
  • BJ4 ISO 05 - X&Y: Sequence into A or out of B with reverse flow check
  • BJ5 ISO 05 - X&Y: Sequence into B or out of A with reverse flow check
  • BJ8 ISO 05 - X&Y: 排气
  • BJ9 ISO 05 - X&Y: Reducer on A and B with reverse flow check
  • BJA ISO 05 - X&Y: 位于A通路上,口3通B
  • BJB ISO 05 - X&Y: 位于B通路上,附测压口,口3通A
  • BJC ISO 05 - X&Y: PT泄压,口3单独回油箱
  • BJO ISO 05 - X&Y: P口减压,口3接T
  • BJP ISO 05 - X&Y: P口减压,口3接T
  • BJW ISO 05 - X&Y: P口减压,口3接T
  • BJX ISO 05 - X&Y: On A and B, port 3 to T
  • BJY ISO 05 - X&Y: AB附双负载, 对口导压
  • CJ2 ISO 05 - X&Y: AT泄压, BT附止回
  • CJ4 ISO 05 - X&Y: On A with reverse flow check
  • CJ5 ISO 05 - X&Y: 位于B通路上附止回
  • CJA ISO 05 - X&Y: AT泄压
  • CJB ISO 05 - X&Y: B到T
  • CJC ISO 05 - X&Y: A to B or B to A
  • CJP ISO 05 - X&Y: PT泄压
  • CJX ISO 05 - X&Y: AT及BT泄压
  • CJY ISO 05 - X&Y: AB对口泄压
  • DJA ISO 05 - X&Y: Flow into workport B or out of A
  • DJB ISO 05 - X&Y: Flow into workport A or out of B
  • DJC ISO 05 - X&Y: Flow into workport A
  • DJD ISO 05 - X&Y: Out of A
  • DJE ISO 05 - X&Y: Flow into workport B
  • DJF ISO 05 - X&Y: Out of B
  • DJJ ISO 05 - X&Y: Flow into workport B or out of A
  • DJK ISO 05 - X&Y: Flow into workport A or out of B
  • DJL ISO 05 - X&Y: Flow into workports A and B or out of A and B
  • DJN ISO 05 - X&Y: PB口优先流量控制, T旁通
  • DJO ISO 05 - X&Y: 位于P通路
  • DJP ISO 05 - X&Y: 位于P通路
  • DJR ISO 05 - X&Y: 双阀,口1接T,口2接A及B
  • DJS ISO 05 - X&Y: A to B or B to A
  • DJT ISO 05 - X&Y: T背压
  • DJU ISO 05 - X&Y: A to P or B to P
  • DJW ISO 05 - X&Y: 双阀,口1接T,口2接A及B
  • DJX ISO 05 - X&Y: AT及BT泄压
  • DJY ISO 05 - X&Y: Flow into workports A and B or out of A and B
  • DJZ ISO 05 - X&Y: Flow into workports A and B or out of A and B
  • NJ2 ISO 05 - X&Y: Reducer/reliever on A with reverse flow check and port 4 external
  • NJ3 ISO 05 - X&Y: Reducer/reliever on B with reverse flow check and port 4 external
  • NJA ISO 05 - X&Y: A口双负载控制,B口导压,口4接T
  • NJB ISO 05 - X&Y: 位于B通路,口3通A,口4接T
  • NJP ISO 05 - X&Y: 位于P通路上, 回油接T口, 口4单独回油
  • NJY ISO 05 - X&Y: AB附双负载, 对口导压
  • U8B ISO 05 - X&Y: On A with reverse flow check
  • U8T ISO 05 - X&Y: 位于B通路上
  • WHY ISO 05 - X&Y: A口优先流量控制附止回
  • WHZ ISO 05 - X&Y: B口优先流量控制附止回
  • WJF ISO 05 - X&Y: P口减压,口3接T
  • X8E P到A, B, T口关, 封板
  • X8K P to A and B, T Blocked
  • Z3F ISO 05 - X&Y: P口减压,口3接T
  • ZFB ISO 05 - X&Y (Euro): P to T, port 3 to Y
  • ZJM ISO 05: Cover manifold, P to A and B to T
  • ZJN ISO 05: Cover manifold, P to T
  • ZJP ISO 05: Cover manifold, all ports blocked
  • ZPP ISO 05 - X&Y: Tap in manifold - A and B
  • ZSQ ISO 05 - X&Y: Tap in manifold - A and B
  • ZSY ISO 05 - X&Y: Tap in manifold - A and B
额外来源 [ + ]