Assembly Build Process

Sun's Assembly Build Process allows you to configure a cartridge and manifold, or main stage and pilot stage cartridge, and build a digital assembly in three dimensional space. The resulting output of this process is the assembly product page, including configuration-specific images, symbols, product information and CAD files for download.

The Assembly Build Process can be accessed from either a cartridge or manifold product page. Only valid choices are allowed.

From a manifold page, you must first choose your cartridge function. Once you choose your function, click on the BUILD ASSEMBLY button below the WHERE TO BUY BUTTON. Once clicked, you will be presented with valid cartridges for your manifold. Select the cartridge of your choice and follow the instructions at the top of the page. If your particular combination has been generated before, the resulting assembly page will be available immediately. If not, you will be asked to enter your email address. Once the page is complete, an email will be sent to you including a link to the assembly product page.

From a cartridge product page, click on BUILD ASSEMBLY and you will be presented with a listing of compatible manifolds. In the case of main stage and pilot stage cartridges, you can either build a cartridge to cartridge assembly or a cartridge to manifold assembly. Once your choice has been made, follow the instructions at the top of the page. If your particular combination has been generated before, the resulting assembly page will be available immediately. If not, you will be asked to enter your email address. Once the page is complete, an email will be sent to you including a link to the assembly product page.

Please note that the Assembly Build Process is an automated process. It can be utilized at any time. Pages are generated typically within minutes but delays can occasionally be expected. In the event of a delay, a team at Sun will work to resolve the issue to ensure you receive your information as quickly as possible.

740系列锁定/锁紧操作, 手动超控控制组件, L控制

全部展开

技术特性 [ + ]

这种扭转/锁紧紧急操作装置是一种手动旋转式的设备，可用于Sun所有的电磁流量阀以及FLeX系列型号。这种把手是由强化塑料制成，具有耐用，耐高温以及适应恶劣极端环境，同时也适合手套操作。这种装置操作部分带有密封，防止周边环境的污染颗粒进入。一旦安装到Sun的电磁阀上，这种紧急操作的装置就会允许使用者人工操作阀芯。如需选用这种结构，请在阀订货代码上选择”L”控制方式。Sun用于现场转换的元件同样是可以提供的。请注意扭转/锁紧手动紧急操作不适合用在负载保持的场合。

这种制动/锁定紧急操作方式“L”可以允许操作员逆时针旋转装置并使其固定在机械制动位置，以保证阀芯移动后位置的固定。这个位置将会被保持，直至操作员顺时针旋转其回到原位，非得电的状态。请注意：这种制动位置并不适用于负载保持的场合。
这个人工控制装置的机械寿命大致为7000次工作循环。
若要正确操作旋转型的手动超控，很重要的一点是在旋转之前充分抓住旋转帽。

回到首页

技术数据 [ + ]

针对插装阀的型号	DBAF, DFBD, DFBE, DFBF, DFBG, DLDF, DTAF, DTBF, DWBD, DWBF, DWDFDBAF, DFBD, DFBE, DFBF, DFBG, DLDF, DTAF, DTBF, DWBD, DWBF, DWDF
材料	Black plastic and aluminumBlack plastic and aluminum
描述	Detent/Lock Operation (Option L)Detent/Lock Operation (Option L)
操作扭矩	15 lbf in.15 lbf in.