2位3通, 外接口切换 分流器, 常闭

流量: 60 gpm240 L/min. | 插孔: T-33A
DSGX : 2位3通, 外接口切换 分流器, 常闭
技术特性 [ + ]

此类阀为透气切换,2位常闭换向阀。当口1透气接油箱,口3和口1的压差超过弹簧力将使阀切换,因此使口3与口2和口4接通。

  • 这个阀并不是双稳态的;其在所示的两个位置之间是可以调节的。
  • 1口泄油流量是起压力补偿功能,其在技术参数里面有相关陈列。
  • 相对于压力1口,必须要有足够的压力在3口,才可以移动阀芯。
  • 这种阀可与分流/集流阀并联使用。关闭时,油液通过分流/集流阀。开启式大量的油液将会绕开分流/集流阀通过此阀,从而使系统更为高效作业。
  • 如果一个先导阀用来控制多个该外控分流阀时。油口1处应加入单向阀,从而防止高低压侧之间的相互干扰。
  • 这种泄油动作型是自清洁功能,所以它对污染物不敏感。
  • 更坚硬的阀芯和阀套可以保证一贯的阀芯泄漏等级以及更好的耐磨性能。
  • Sun浮动式的结构可以最大限度地减少由于过大的安装扭矩以及孔型加工的误差所造成的干涉现象。
技术数据 [ + ]
注意:技术参数可能因产品配置而不同。请查看产品配置部分。
插孔 T-33A
系列 3
通流能力 60 gpm240 L/min.
最大操作压力 5000 psi350 bar
额定外泄流量 35 in³/min.0,60 L/min.
阀头部安装六角尺寸 1 1/4 in.31,8 mm
阀安装扭矩 150 - 160 lbf ft203 - 217 Nm
型号重量 4.40 lb2,00 kg
Seal kit - Cartridge Buna: 990033007
Seal kit - Cartridge Polyurethane: 990033002
Seal kit - Cartridge Viton: 990033006
性能曲线 [ + ]
常见问题 [ + ]

There are exactly 250 Sun drops in a cubic inch or 15 in a cc.

Direct acting valves are used to prevent over pressure and pilot operated valves are used to regulate pressure. If you are unsure, use a direct acting valve. Sun's direct acting valves are very fast, dirt tolerant, stable, and robust. Sun's pilot operated valves are moderately fast, they have a low pressure rise vs. flow curve, and they are easy to adjust.

Only external seals are serviceable.  Sun offers replacement seal kits for all cartridge models. The applicable kit part number can be found in the product page's Technical Data table or by using our Cartridge Seal Kit search function located under Accessories. Please note: Converting the external seals from one material to another does not ensure fluid compatibility with that material due to the existence of internal seals within the cartridge.
额外来源 [ + ]