Assembly Build Process

Sun's Assembly Build Process allows you to configure a cartridge and manifold, or main stage and pilot stage cartridge, and build a digital assembly in three dimensional space. The resulting output of this process is the assembly product page, including configuration-specific images, symbols, product information and CAD files for download.

The Assembly Build Process can be accessed from either a cartridge or manifold product page. Only valid choices are allowed.

From a manifold page, you must first choose your cartridge function. Once you choose your function, click on the BUILD ASSEMBLY button below the WHERE TO BUY BUTTON. Once clicked, you will be presented with valid cartridges for your manifold. Select the cartridge of your choice and follow the instructions at the top of the page. If your particular combination has been generated before, the resulting assembly page will be available immediately. If not, you will be asked to enter your email address. Once the page is complete, an email will be sent to you including a link to the assembly product page.

From a cartridge product page, click on BUILD ASSEMBLY and you will be presented with a listing of compatible manifolds. In the case of main stage and pilot stage cartridges, you can either build a cartridge to cartridge assembly or a cartridge to manifold assembly. Once your choice has been made, follow the instructions at the top of the page. If your particular combination has been generated before, the resulting assembly page will be available immediately. If not, you will be asked to enter your email address. Once the page is complete, an email will be sent to you including a link to the assembly product page.

Please note that the Assembly Build Process is an automated process. It can be utilized at any time. Pages are generated typically within minutes but delays can occasionally be expected. In the event of a delay, a team at Sun will work to resolve the issue to ensure you receive your information as quickly as possible.

4-vías, 2-posiciones , direccional, operada por solenoide carrete válvula (740 Series)

Capacidad: 10 gpm40 L/min. | Cavidad: T-31A

Expand All

Technical Features [ + ]

This solenoid-operated 4-way, 2-position cartridge is a direct-acting, balanced spool directional valve.

The solenoid tube assembly is fatigue rated for 5000 psi (350 bar) service.
This valve is direct actuated and requires no minimum hydraulic pressure for operation.
All configurations of this valve include zinc-nickel plating as standard for 1000-hour salt fog protection.
Coil connector options offer ratings up to IP69K. See individual coil product pages for details.
On models equipped with the D or L control, the detent mechanism in the manual override is meant for temporary actuation. The D, L and T manual control assemblies have a mechanical life expectancy of approximately 7,000 cycles.
This valve utilizes a wet armature design. This means that the working fluid surrounds the armature and is exposed to the heat generated by the coil. This can be a factor if the coil is energized for long periods of time. Some fluids, notably water/glycol mixtures, break down at these temperatures over time and form varnishes that will affect the function of the cartridge.
The solenoid's unique magnetic design results in a high efficiency solenoid, yielding high spool actuating force per Watt expended, leading to reliable valve shifting.
Coils can be mounted on the tube in either direction.
Incorporates the Sun floating style construction to minimize the possibility of internal parts binding due to excessive installation torque and/or cavity/cartridge machining variations.

Technical Data [ + ]

Notar: Los datos pueden variar según la configuración . Consulte la sección de CONFIGURATION

cavidad	T-31A
Series	1
Capacity	10 gpm40 L/min.
Maximum Operating Pressure	5000 psi350 bar
Maximum Valve Leakage at 110 SUS (24 cSt)	10 in³/min.@3000 psi160 cc/min.@210 bar
Manual Override Force Requirement	5 lbs/1000 psi @ Port 133 N/100 bar @ Port 1
Manual Override Stroke	.10 in.2,5 mm
Response Time - Typical	50 ms50 ms
Switching Frequency	15,000 max. cycles/hr15,000 max. cycles/hr
Solenoid Tube Diameter	.63 in.16 mm
Valve Hex Size	7/8 in.22,2 mm
Coil Nut Torque	3.5 - 3.9 lbf ft4,8 - 5,3 Nm
Valve Installation Torque	30 - 35 lbf ft41 - 47 Nm
Model Weight	.55 lb0,25 kg
Seal and nut kit - Coil	Viton: 990740006
Seal kit - Cartridge	Buna: 990431007
Seal kit - Cartridge	Viton: 990431006

Performance Curves [ + ]

Performance Curve for DNDF: 4-vías, 2-posiciones , direccional, operada por solenoide carrete válvula (740 Series)

FAQs [ + ]

How big is a drop of hydraulic oil?

There are exactly 250 Sun drops in a cubic inch or 15 in a cc.

Direct acting or pilot operated - what do I use?

Direct-acting valves are used to prevent over pressure, and pilot-operated valves are used to regulate pressure. If you are unsure, use a direct-acting valve. Sun's direct acting valves are very fast, dirt tolerant, stable, and robust. Sun's pilot-operated valves are moderately fast, they have a low pressure rise vs. flow curve, and they are easy to adjust.

What parts of the Sun cartridge valve are field serviceable?

Only external seals are serviceable. Sun offers replacement seal kits for all cartridge models. The applicable kit part number can be found in the product page's Technical Data table or by using our Cartridge Seal Kit search function located under Accessories. Please note: Converting the external seals from one material to another does not ensure fluid compatibility with that material due to the existence of internal seals within the cartridge.

Additional Resources [ + ]

Realces

Technical Tips

Solenoid Operated Directional Valves (1.01 MB)
Manufacturing Sun Cartridge Cavities (522.27 KB)
Solenoid Coils for Switching and Proportional Valves (975.2 KB)

Technical Information

Coil Information [ + ]

No coil selected.

Modelo

reset to default

DNDFXNN

X-Control, N-Spool

view all

Configuration Rules

CONTROL

SPOOL CONFIGURATION

SEAL MATERIAL

BOBINA

Where To Buy

When the coil is in this group (211, 212, 212D, 212X02, 214D, 214X01, 223, 224D, 224X01, 228, 228X01, 612, 612D, 614, 614D, 624, 628, 712, 714, 724, 728, 812, 814, 824, 828, 912, 912X01, 914, 914X01, 924, 924X01, 928, 928X02, JM11CD, JM12CD, JM23CD, JM24CD, JN12BD, JN23BD, JN24CD), the range must be C, E, N or T
When the coil is in this group (212X01, 214, 214X02, 224, 224X02, 228D, 228X02, 624D, 628D, 712D, 714D, 724D, 728D, 812D, 814D, 824D, 828D, 912D, 912X02, 914D, 914X02, 924D, 924X02, 928D, 928X01, JM11BD, JM12BD, JM23BD, JM24BD, JN11BD, JN11CD, JN12CD, JN23CD, JN24BD), the range must be C, T, N or E
When the coil is in this group (JM11BD, JM11CD, JM12BD, JM12CD, JM23BD, JM23CD, JM24BD, JM24CD, JN11BD, JN11CD, JN12BD, JN12CD, JN23BD, JN23CD, JN24BD, JN24CD), the control must be M or X

DNDF | Cartuchos » Solenoid Operated » 4-vías | Sun Hydraulics

Assembly Build Process

Assembly Build Process

4-vías, 2-posiciones , direccional, operada por solenoide carrete válvula (740 Series)

Symbols for DNDF

Footer