4-vías, 3-posiciones, alimentación regulada proporcional direccional válvula

Capacidad: 7 gpm28 L/min. | Cavidad: T-52A
FTCC : 4-vías, 3-posiciones, alimentación regulada  proporcional direccional válvula
Technical Features [ + ]

This valve is a 4-way, 3-position proportional directional valve. Work ports 2 and 4 are drained to 5 in the center position and port 3 is closed. Pilot pressure at port 1 opposes the spring and creates a variable metering orifice between ports 3 and 4 that is proportional to the pressure at 1. Piloting 6 opens 3 to 2. The force balance of the flow forces, spring and pilot pressure results in a degree of partial self-compensation as the load pressure changes.

Pressure at ports 1 and 6 directly oppose each other.

  • Pilot ports 1 and 6 will accept 5000 psi (350 bar), however, pressures over 500 psi (35 bar) do not increase flow since at this point the spool will be fully shifted.
  • The valve exhibits a degree of self compensation. If more precise regulation of flow is required, then a separate compensator should be considered. This may be achieved by the use of a bypass compensator, model LR*C-XHN, or a restrictive compensator, model LP*C-XHN.
  • Pressure at ports 1 and 6 directly oppose each other.
  • Incorporates the Sun floating style construction to minimize the possibility of internal parts binding due to excessive installation torque and/or cavity/cartridge machining variations.
Technical Data [ + ]
Notar: Los datos pueden variar según la configuración . Consulte la sección de CONFIGURATION
cavidad T-52A
Series 2
Capacity 7 gpm28 L/min.
Maximum Operating Pressure 5000 psi350 bar
Pilot Pressure Required to Shift Valve 60 - 130 psi4 - 9 bar
Pilot Pressure Required for Full Shift at Rated Flow 290 - 340 psi20 - 23 bar
Maximum Valve Leakage at 110 SUS (24 cSt) 5.5 in³/min.@1000 psi90 cc/min.@70 bar
Pilot Volume Displacement .04 in³0,66 cc
Hysteresis at 50% command ±35%±35%
Valve Hex Size 1 1/8 in.28,6 mm
Compensated Flow (using LPJCXHN) 7 - 10 gpm28 - 40 L/min.
Valve Installation Torque 45 - 50 lbf ft61 - 68 Nm
Model Weight 1.00 lb0,45 kg
Seal kit - Cartridge Buna: 990052007
Seal kit - Cartridge Viton: 990052006
Performance Curves [ + ]
FAQs [ + ]

There are exactly 250 Sun drops in a cubic inch or 15 in a cc.

Direct-acting valves are used to prevent over pressure, and pilot-operated valves are used to regulate pressure. If you are unsure, use a direct-acting valve. Sun's direct acting valves are very fast, dirt tolerant, stable, and robust. Sun's pilot-operated valves are moderately fast, they have a low pressure rise vs. flow curve, and they are easy to adjust.

Only external seals are serviceable.  Sun offers replacement seal kits for all cartridge models. The applicable kit part number can be found in the product page's Technical Data table or by using our Cartridge Seal Kit search function located under Accessories. Please note: Converting the external seals from one material to another does not ensure fluid compatibility with that material due to the existence of internal seals within the cartridge.
Additional Resources [ + ]