Assembly Build Process

Sun's Assembly Build Process allows you to configure a cartridge and manifold, or main stage and pilot stage cartridge, and build a digital assembly in three dimensional space. The resulting output of this process is the assembly product page, including configuration-specific images, symbols, product information and CAD files for download.

The Assembly Build Process can be accessed from either a cartridge or manifold product page. Only valid choices are allowed.

From a manifold page, you must first choose your cartridge function. Once you choose your function, click on the BUILD ASSEMBLY button below the WHERE TO BUY BUTTON. Once clicked, you will be presented with valid cartridges for your manifold. Select the cartridge of your choice and follow the instructions at the top of the page. If your particular combination has been generated before, the resulting assembly page will be available immediately. If not, you will be asked to enter your email address. Once the page is complete, an email will be sent to you including a link to the assembly product page.

From a cartridge product page, click on BUILD ASSEMBLY and you will be presented with a listing of compatible manifolds. In the case of main stage and pilot stage cartridges, you can either build a cartridge to cartridge assembly or a cartridge to manifold assembly. Once your choice has been made, follow the instructions at the top of the page. If your particular combination has been generated before, the resulting assembly page will be available immediately. If not, you will be asked to enter your email address. Once the page is complete, an email will be sent to you including a link to the assembly product page.

Please note that the Assembly Build Process is an automated process. It can be utilized at any time. Pages are generated typically within minutes but delays can occasionally be expected. In the event of a delay, a team at Sun will work to resolve the issue to ensure you receive your information as quickly as possible.

740 Series, 230 VAC 50/60 Hz, high-power coil with ISO/DIN 43650, Form A connector with TVS Diode

Expand All

Technical Features [ + ]

Coil windings utilize Class N, (392° F [200 °C] rated) magnet wire.
Power cable with mating connector is required and is not included with the coil.
The coil is magnetically symmetrical and can be mounted on the solenoid tube in either direction for best cable access without affecting performance.
Coil is fully RoHS compliant. Restricted materials less than 0.1% total by weight.
The external steel shell is zinc-nickel plated and provides 1000-hour salt fog protection.
Coil includes a transient voltage suppression (TVS) diode.
IP rating for this coil is IP65/IP67.
This coil is CE compliant. It meets the requirements of the Low Voltage Directive (2006/95/EC) and EN 60204-1:2006.

Technical Data [ + ]

Operating Temperature Range	-40 to 230 °F-40 to 110 °C
Arc Suppression (TVS)	IncludedIncluded
Power Consumption (cold) - at rated voltage	25 Watts25 Watts
Maximum Ambient Temperature	122 °F50 °C
Resistance at 20º C	1686 ohms ±10%1686 ohms ±10%
Voltage/Frequency	230 VAC 50/60 Hz230 VAC 50/60 Hz
Operating Voltage Range	+10%/-15%+10%/-15%
Duty Cycle Rating	100 %100 %
Connector	ISO4400 - EN/DIN175301-803, Form A (ISO/DIN 43650) 3-pinISO4400 - EN/DIN175301-803, Form A (ISO/DIN 43650) 3-pin
Solenoid Tube Diameter	.62 in.15,7 mm
Coil Nut Torque	4.5 lbf in.0,5 Nm
Model Weight	9.6 oz.272 grams

FAQs [ + ]

What are the shock and vibration levels the 740 coils are capable of withstanding?

740 Series coils meet Sun specification S-367. This specification is on our website under Technical Resources and is also listed in the Additional Resources tab on applicable product pages. Please see sections 11 and 12 of Environmental Test Specification for Electrical and Electronic Components; S-367.

Used With [ + ]

What models can this kit be used with?

DBAF 3-way solenoid-operated directional spool valve - pilot capacity (740 Series)
DBAFS 3-way, soft shift, solenoid-operated directional spool valve - pilot capacity (740 Series)
DFBF FLeX Series 2-way, 2-stage, solenoid-operated directional poppet valve with reverse flow check - flow 2-1
DFBG FLeX Series 2-way, 2-stage, solenoid-operated directional poppet valve with reverse flow check - flow 2-1
DFCI 2-way, 2-stage, solenoid-operated directional poppet valve - flow 1-2 (740 Series)
DFCJ 2-way, 2-stage, solenoid-operated directional poppet valve - flow 2-1 (740 Series)
DFDI 2-way, 2-stage, solenoid-operated directional poppet valve - flow 1-2 (740 Series)
DFDJ 2-way, 2-stage, solenoid-operated directional poppet valve - flow 2-1 (740 Series)
DFEI 2-way, 2-stage, solenoid-operated directional poppet valve - flow 1-2 (740 Series)
DFEJ 2-way, 2-stage, solenoid-operated directional poppet valve - flow 2-1 (740 Series)
DFFI 2-way, 2-stage, solenoid-operated directional poppet valve - flow 1-2 (740 Series)
DFFJ 2-way, 2-stage, solenoid-operated directional poppet valve - flow 2-1 (740 Series)
DLDF 2-way, solenoid-operated directional spool valve (740 Series)
DLDFS 2-way, soft shift, solenoid-operated directional spool valve (740 Series)
DMBF FLeX Series 3-way, solenoid-operated directional spool valve
DNBF FLeX Series 4-way, 2-position, solenoid-operated directional spool valve
DTAF FLeX Series 2-way, direct-acting, solenoid-operated directional blocking poppet valve
DTAFS FLeX Series 2-way, soft shift, solenoid-operated directional poppet valve - pilot capacity
DTBF FLeX Series 2-way, direct-acting, solenoid-operated directional blocking poppet valve
DTCF 2-way, direct-acting, solenoid-operated directional blocking poppet valve with overlap (740 Series)
DTDF 2-way, direct-acting, solenoid-operated directional blocking poppet valve (740 Series)
DTDFS 2-way, direct-acting, soft shift, solenoid-operated directional blocking poppet valve (740 Series)
DWBF FLeX Series 3-way, direct-acting, solenoid-operated directional blocking poppet valve
DWDF 3-way, direct-acting, solenoid-operated directional poppet valve (740 Series)
FREP FLeX Series 3-way, direct-acting, electro-proportional, bypass/restrictive, priority flow control valve
PRDF Electro-proportional, direct-acting, pressure reducing/relieving valve with open transition (740 Series)
PRDG Electro-proportional, direct-acting, pressure reducing/relieving valve (740 Series)
RVCK FLeX Series 2-stage, solenoid-operated adjustable relief valve, normally vented
RVCL FLeX Series 2-stage, solenoid-operated adjustable relief valve, energize to vent
RVCM FLeX Series 2-stage, solenoid-operated adjustable relief valve, energize to block
RVCN FLeX Series 2-stage, solenoid-operated adjustable relief valve, normally blocked

Additional Resources [ + ]

Highlights

Technical Information

740 Series Coils - Derating Tables (56.42 KB)
Environmental Test Specification for Electrical and Electronic Co (254.61 KB)
Sun's Floating Style Screw-In Cartridge (1.06 MB)
CE Declaration of Conformity - XMD 12-2017 (133.69 KB)
XMD Coil Clip Installation Guide (749.23 KB)

740223 | Accessories » Coils | Sun Hydraulics

Assembly Build Process

Assembly Build Process

740 Series, 230 VAC 50/60 Hz, high-power coil with ISO/DIN 43650, Form A connector with TVS Diode

Footer