Assembly Build Process

Sun's Assembly Build Process allows you to configure a cartridge and manifold, or main stage and pilot stage cartridge, and build a digital assembly in three dimensional space. The resulting output of this process is the assembly product page, including configuration-specific images, symbols, product information and CAD files for download.

The Assembly Build Process can be accessed from either a cartridge or manifold product page. Only valid choices are allowed.

From a manifold page, you must first choose your cartridge function. Once you choose your function, click on the BUILD ASSEMBLY button below the WHERE TO BUY BUTTON. Once clicked, you will be presented with valid cartridges for your manifold. Select the cartridge of your choice and follow the instructions at the top of the page. If your particular combination has been generated before, the resulting assembly page will be available immediately. If not, you will be asked to enter your email address. Once the page is complete, an email will be sent to you including a link to the assembly product page.

From a cartridge product page, click on BUILD ASSEMBLY and you will be presented with a listing of compatible manifolds. In the case of main stage and pilot stage cartridges, you can either build a cartridge to cartridge assembly or a cartridge to manifold assembly. Once your choice has been made, follow the instructions at the top of the page. If your particular combination has been generated before, the resulting assembly page will be available immediately. If not, you will be asked to enter your email address. Once the page is complete, an email will be sent to you including a link to the assembly product page.

Please note that the Assembly Build Process is an automated process. It can be utilized at any time. Pages are generated typically within minutes but delays can occasionally be expected. In the event of a delay, a team at Sun will work to resolve the issue to ensure you receive your information as quickly as possible.

Calibrated handknob control kit, H control

Expand All

Technical Features [ + ]

Sun offers a fully calibrated handknob with detent lock for all series of Sun flow control cartridges. The rising stem shows the number of full turns, and 40 graduations/detents exist per full turn. The rising detented locking collar positively locks the handknob against vibration or accidental tampering. The use of this calibrated handknob allows for desired settings to be recorded and repeated. Flow control cartridges may be ordered from Sun in this configuration by specifying an H control in the model number.

For use on the following Sun cartridges: FDBA manufactured on or after November 2010; NCCB, NCCC or NCCD manufactured on or after May 2010; and NFCC or NFCD manufactured on or after March 2010. See our manufacturing Date Code page for more information.
Field conversion kits are not available for the Calibrated Handknob control. The kit listed below contains replacement parts for cartridges originally supplied with an H control.
40 graduations (and locking positions) per single revolution.
Moveable zero indicator with minor disassembly.
Allows for desired settings to be recorded and repeated.

Technical Data [ + ]

Material	Black plasticBlack plastic
Diameter	1.13 in.28,7 mm

Notes [ + ]

Only for cartridges originally supplied with an H handknob. Valves can not be modified in the field.
1. Turn handknob clockwise to fully closed position.
2. With the lockknob in the 'lock' position, remove the detent o-ring from under the knob's collar and roll it up on the skirt. The o-ring is accessible with a paper clip or equivalent through a slot in the lockknob skirt located 180 degrees from the Zero indicator.
3. Push the lockknob towards the cartridge as far as it will go (against cartridge shoulder).
4. Pull the handknob off the stem. Pry points are provided for a thin blade at the back of the handknob (behind numbers 0 and 5).
5. Position the handknob so that numeral 0 most closely aligns with the Zero Indicator. It may be necessary to reposition the lockknob for perfect alignment. The Zero Indicator will not vary more than 15 degrees from the desired final position.
6. Once Zero alignment is achieved, push the handknob onto the stem until it snaps into position.
7. With the lockknob in the locked position, feed the detent o-ring back under the knob's skirt.

Additional Resources [ + ]

Highlights

Sun’s Maximum Setting Limiter

Technical Information

Sun's Floating Style Screw-In Cartridge (1.06 MB)

991244 | Accessories » Cartridge Control Options | Sun Hydraulics

Assembly Build Process

Assembly Build Process

Calibrated handknob control kit, H control

Footer