Assembly Build Process

Sun's Assembly Build Process allows you to configure a cartridge and manifold, or main stage and pilot stage cartridge, and build a digital assembly in three dimensional space. The resulting output of this process is the assembly product page, including configuration-specific images, symbols, product information and CAD files for download.

The Assembly Build Process can be accessed from either a cartridge or manifold product page. Only valid choices are allowed.

From a manifold page, you must first choose your cartridge function. Once you choose your function, click on the BUILD ASSEMBLY button below the WHERE TO BUY BUTTON. Once clicked, you will be presented with valid cartridges for your manifold. Select the cartridge of your choice and follow the instructions at the top of the page. If your particular combination has been generated before, the resulting assembly page will be available immediately. If not, you will be asked to enter your email address. Once the page is complete, an email will be sent to you including a link to the assembly product page.

From a cartridge product page, click on BUILD ASSEMBLY and you will be presented with a listing of compatible manifolds. In the case of main stage and pilot stage cartridges, you can either build a cartridge to cartridge assembly or a cartridge to manifold assembly. Once your choice has been made, follow the instructions at the top of the page. If your particular combination has been generated before, the resulting assembly page will be available immediately. If not, you will be asked to enter your email address. Once the page is complete, an email will be sent to you including a link to the assembly product page.

Please note that the Assembly Build Process is an automated process. It can be utilized at any time. Pages are generated typically within minutes but delays can occasionally be expected. In the event of a delay, a team at Sun will work to resolve the issue to ensure you receive your information as quickly as possible.

Key lock control kit

Expand All

Technical Features [ + ]

Sun offers an optional adjustment Key Lock Cover Kit for cartridges supplied with an L control. With this kit, adjustments can be locked with a key to prevent unauthorized changes to the valve setting. Adjustments are easily accessible once the lock assembly is removed via the key. Installation of this key lock kit requires the replacement of the standard locknut with a special adapter locknut which accepts the lock assembly. A new wire stop ring is also provided for overset protection.

This key lock assembly can only be ordered as a kit and is not available pre-assembled to a cartridge.
For use on all Sun Cartridges with an L adjustment control except for Series 0, counterbalance, and load control cartridges.

Technical Data [ + ]

Title	Key Lock KitKey Lock Kit
For Cartridge Models	All Models with L ControlAll Models with L Control

Notes [ + ]

Remove original wire stop ring (where applicable) and locknut.
Thread on the adapter locknut and install new wire stop ring through slot provided.
Adjust valve to desired setting and torque adapter locknut to 108 lbf in (12 Nm).
Slide lock assembly over adapter, lock and remove key.

Additional Resources [ + ]

Highlights

Sun’s Maximum Setting Limiter

Technical Information

Sun's Floating Style Screw-In Cartridge (1.06 MB)

993008 | Accessories » Cartridge Control Options | Sun Hydraulics

Assembly Build Process

Assembly Build Process

Key lock control kit

Symbols for 993008

Footer