Assembly Build Process

Sun's Assembly Build Process allows you to configure a cartridge and manifold, or main stage and pilot stage cartridge, and build a digital assembly in three dimensional space. The resulting output of this process is the assembly product page, including configuration-specific images, symbols, product information and CAD files for download.

The Assembly Build Process can be accessed from either a cartridge or manifold product page. Only valid choices are allowed.

From a manifold page, you must first choose your cartridge function. Once you choose your function, click on the BUILD ASSEMBLY button below the WHERE TO BUY BUTTON. Once clicked, you will be presented with valid cartridges for your manifold. Select the cartridge of your choice and follow the instructions at the top of the page. If your particular combination has been generated before, the resulting assembly page will be available immediately. If not, you will be asked to enter your email address. Once the page is complete, an email will be sent to you including a link to the assembly product page.

From a cartridge product page, click on BUILD ASSEMBLY and you will be presented with a listing of compatible manifolds. In the case of main stage and pilot stage cartridges, you can either build a cartridge to cartridge assembly or a cartridge to manifold assembly. Once your choice has been made, follow the instructions at the top of the page. If your particular combination has been generated before, the resulting assembly page will be available immediately. If not, you will be asked to enter your email address. Once the page is complete, an email will be sent to you including a link to the assembly product page.

Please note that the Assembly Build Process is an automated process. It can be utilized at any time. Pages are generated typically within minutes but delays can occasionally be expected. In the event of a delay, a team at Sun will work to resolve the issue to ensure you receive your information as quickly as possible.

4 voies , 3 Positions, ISO 4401-03 électro distributeur Dispositif de contrôle Valve - 5000 psi (350 bar)

Capacité: 21.1 gpm80 L/min. | Cavité:

Développer

Caractéristiques techniques [ + ]

Direct-acting directional control valve with subplate mounting interface per ISO 4401, DIN 24340 (CETOP 03)
Compact design with reduced solenoid dimensions
Zinc-nickel (ZnNi) coated surface protection for mobile applications (ISO 9227, 520 hour salt spray)
High transmitted hydraulic power up to 5100 psi (350 bar) with optimized design to minimize pressure drop
Five-chamber housing design with reduced hydraulic power dependence on fluid viscosity
The coil is fastened to the core tube with a retaining nut and can be rotated by 360° to suit the available space
Includes manual override function (pressure in port T must be less than 363 psi (25 bar) for the spool to shift properly)

Retour Vers le Haut

Caractéristiques [ + ]

Remarque: Les caractéristiques peuvent changer selon la configuration. Voir la section CONFIGURATION.

Capacité	21.1 gpm80 L/min.
Poids du composant (avec la bobine)	3,5 lb1,6 kg
Plan de Pose	Cetop 03Cetop 03
Matière des Joints	Buna NBuna N
Ambient Temperature Range	-22 to 122 °F-30 to 50 °C
Max. operating press. at ports P,A,B	5080 psi350 bar
Max. operating press. at port T	3050 psi210 bar
Fluid Temperature Range	-22 to 176 °F-30 to 80 °C
Response Time -ON	30 - 50 ms30 - 50 ms
Response Time - OFF	10 - 50 ms10 - 50 ms

Retour Vers le Haut

Performance Curves [ + ]

Performance Curve for 75V307: 4 voies , 3 Positions, ISO 4401-03 électro distributeur Dispositif de contrôle Valve - 5000 psi (350 bar)

Retour Vers le Haut

FAQs [ + ]

Quel est le volume d'une goutte d'huile hydraulique ?

Il y a exactement 15 gouttes Sun dans un centimètre cube.

Direct acting, pilot operated, what do I use?

Direct acting valves are used to prevent over pressure and pilot operated valves are used to regulate pressure. If you are unsure, use a direct acting valve. Sun's direct acting valves are very fast, dirt tolerant, stable, and robust. Sun's pilot operated valves are moderately fast, they have a low pressure rise vs. flow curve, and they are easy to adjust.

What parts of the Sun cartridge valve are field serviceable?

Only external seals are serviceable. Sun offers replacement seal kits for all cartridge models. The applicable kit part number can be found in the product page's Technical Data table or by using our Cartridge Seal Kit search function located under Accessories. Please note: Converting the external seals from one material to another does not ensure fluid compatibility with that material due to the existence of internal seals within the cartridge.

Retour Vers le Haut

Notes [ + ]

In case of solenoid malfunction or power failure, the spool of the valve can be shifted by manual override as long as the pressure in port T does not exceed 363 psi (25 bar).
One solenoid must be de-energized before the other solenoid can be charged.

Retour Vers le Haut

Ressources Complémentaires [ + ]

A la Une de Sun