Assembly Build Process

Sun's Assembly Build Process allows you to configure a cartridge and manifold, or main stage and pilot stage cartridge, and build a digital assembly in three dimensional space. The resulting output of this process is the assembly product page, including configuration-specific images, symbols, product information and CAD files for download.

The Assembly Build Process can be accessed from either a cartridge or manifold product page. Only valid choices are allowed.

From a manifold page, you must first choose your cartridge function. Once you choose your function, click on the BUILD ASSEMBLY button below the WHERE TO BUY BUTTON. Once clicked, you will be presented with valid cartridges for your manifold. Select the cartridge of your choice and follow the instructions at the top of the page. If your particular combination has been generated before, the resulting assembly page will be available immediately. If not, you will be asked to enter your email address. Once the page is complete, an email will be sent to you including a link to the assembly product page.

From a cartridge product page, click on BUILD ASSEMBLY and you will be presented with a listing of compatible manifolds. In the case of main stage and pilot stage cartridges, you can either build a cartridge to cartridge assembly or a cartridge to manifold assembly. Once your choice has been made, follow the instructions at the top of the page. If your particular combination has been generated before, the resulting assembly page will be available immediately. If not, you will be asked to enter your email address. Once the page is complete, an email will be sent to you including a link to the assembly product page.

Please note that the Assembly Build Process is an automated process. It can be utilized at any time. Pages are generated typically within minutes but delays can occasionally be expected. In the event of a delay, a team at Sun will work to resolve the issue to ensure you receive your information as quickly as possible.

XMD Series, 2-pin Deutsch prototype cable - 30CM

Expand All

Technical Features [ + ]

Deutsch cable assembly for use with Sun's XMD Series electro-hydraulic drivers.

Workmanship performed to IPC-A-620 Class 2
Stranded Black UL 3289CSA 18 Gauge Wire
Rated for 150°C (302°F)
Insulation type XLPE
Rated for 750 VDC and 600 VAC

Technical Data [ + ]

Length	30 cm30 cm
Connector	Molex 93445-1101, BlackMolex 93445-1101, Black

Used With [ + ]

What models can this kit be used with?

991711300 XMD Series, 12-pin Deutsch prototype cable, single-output - 3M
991711600 XMD Series, 12-pin Deutsch prototype cable, single-output - 6M
991712300 XMD Series, 12-pin Deutsch prototype cable, double-output - 3M
991712600 XMD Series, 12-pin Deutsch prototype cable, double-output - 6M
XMD-01 Configurable single-output driver used with proportional and solenoid-operated switching valves
XMD-02 Configurable double-output driver used with proportional and solenoid-operated switching valves