Baugruppe erstellen

Sun's Assembly Build Process allows you to configure a cartridge and manifold, or main stage and pilot stage cartridge, and build a digital assembly in three dimensional space. The resulting output of this process is the assembly product page, including configuration-specific images, symbols, product information and CAD files for download.

The Assembly Build Process can be accessed from either a cartridge or manifold product page. Only valid choices are allowed.

From a manifold page, you must first choose your cartridge function. Once you choose your function, click on the BUILD ASSEMBLY button below the WHERE TO BUY BUTTON. Once clicked, you will be presented with valid cartridges for your manifold. Select the cartridge of your choice and follow the instructions at the top of the page. If your particular combination has been generated before, the resulting assembly page will be available immediately. If not, you will be asked to enter your email address. Once the page is complete, an email will be sent to you including a link to the assembly product page.

From a cartridge product page, click on BUILD ASSEMBLY and you will be presented with a listing of compatible manifolds. In the case of main stage and pilot stage cartridges, you can either build a cartridge to cartridge assembly or a cartridge to manifold assembly. Once your choice has been made, follow the instructions at the top of the page. If your particular combination has been generated before, the resulting assembly page will be available immediately. If not, you will be asked to enter your email address. Once the page is complete, an email will be sent to you including a link to the assembly product page.

Please note that the Assembly Build Process is an automated process. It can be utilized at any time. Pages are generated typically within minutes but delays can occasionally be expected. In the event of a delay, a team at Sun will work to resolve the issue to ensure you receive your information as quickly as possible.

Faster flat face ISO 16028 coupling - FFH style - SAE-10

Alle expandieren

Technische Eigenschaften [ + ]

Flach dichtende FASTER Kupplungen erweitern SUN Steuerblöcke um die zusätzliche Möglichkeit von Schnellkupplungen. Die Kupplungen helfen bei der Vermeidung von Kontamination und Ölverlusten.

Flachdichtendes System, das Medienaustritte beim Anschließen und Trennen verhindert.
"Push to connect" - Verbindung
Kuppeln unter Druck ist nicht erlaubt
Für Anwendungen im Agrar-, Bau-, Industrie- und Mobilbereich.

Zurück nach oben

Technische Daten [ + ]

Zulässiger Betriebsdruck	5000 psi350 bar
Dichtungsmaterial	Buna-NBuna-N
Werkstoff	Zinc Nickel Plated SteelZinc Nickel Plated Steel
Länge	3.48 in.88,4 mm
Nominal Size	5/8"5/8"
Hex Size	41 mm (1.61 in.)41 mm (1.61 in.)
Manufacturer P/N	FFH10-1/58SMFFH10-1/58SM
Extension Dimension	2.98 in.75,7 mm
工作温度	-25 °C to 100 °C-25 °C to 100 °C
Surface Treatment	MATE 1000 (Zn-Ni)MATE 1000 (Zn-Ni)
Anschlussgröße	SAE -10SAE -10

Zurück nach oben

Leistungskurven [ + ]

Performance Curve for 335005058: Faster flat face ISO 16028 coupling - FFH style - SAE-10

Zurück nach oben

Zusätzliche Hilfsmittel [ + ]

Technische Informationen

Zurück nach oben

335005058 | Zubehör » Faster Quick Disconnect Couplings | Sun Hydraulics

Baugruppe erstellen

Baugruppe erstellen

Faster flat face ISO 16028 coupling - FFH style - SAE-10

Footer