Assembly Build Process

Sun's Assembly Build Process allows you to configure a cartridge and manifold, or main stage and pilot stage cartridge, and build a digital assembly in three dimensional space. The resulting output of this process is the assembly product page, including configuration-specific images, symbols, product information and CAD files for download.

The Assembly Build Process can be accessed from either a cartridge or manifold product page. Only valid choices are allowed.

From a manifold page, you must first choose your cartridge function. Once you choose your function, click on the BUILD ASSEMBLY button below the WHERE TO BUY BUTTON. Once clicked, you will be presented with valid cartridges for your manifold. Select the cartridge of your choice and follow the instructions at the top of the page. If your particular combination has been generated before, the resulting assembly page will be available immediately. If not, you will be asked to enter your email address. Once the page is complete, an email will be sent to you including a link to the assembly product page.

From a cartridge product page, click on BUILD ASSEMBLY and you will be presented with a listing of compatible manifolds. In the case of main stage and pilot stage cartridges, you can either build a cartridge to cartridge assembly or a cartridge to manifold assembly. Once your choice has been made, follow the instructions at the top of the page. If your particular combination has been generated before, the resulting assembly page will be available immediately. If not, you will be asked to enter your email address. Once the page is complete, an email will be sent to you including a link to the assembly product page.

Please note that the Assembly Build Process is an automated process. It can be utilized at any time. Pages are generated typically within minutes but delays can occasionally be expected. In the event of a delay, a team at Sun will work to resolve the issue to ensure you receive your information as quickly as possible.

Pochette de joints pour cartouche, taille 1 - cavité T-11A, Buna-N

Développer

Caractéristiques techniques [ + ]

Sun propose des kits de joints de remplacement pour tous les modèles de cartouches. Ces kits comportent tous les joints externes de la cartouche ainsi que les instructions d’installation. les kits de joints sont disponibles en Buna-N en Viton pour tous les modèles, ainsi qu'en EPDM et en polyuréthane pour la plupart des modèles.
SVP notez que: Convertir les joints externes d’une matière à une autre n’assure pas la compatibilité avec le fluide étant donné l’existence de joints internes à la cartouche.

La durée de stockage de ce kit de joints pour cartouche est de dix ans à partir de la date d’achat. Cette date est imprimée sur l’emballage du kit.

Retour Vers le Haut

Caractéristiques [ + ]

Taille	1
Filetage de la Cartouche	M20M20
Dimensions du six pans de la valve	7/8 in.22,2 mm
Couple de serrage de la valve	30 à 35 lbf ft41 - 47 Nm
Cavité	T-11A

Retour Vers le Haut

Used With [ + ]

What models can this kit be used with?

DMDB
Value Series 3 Voies, électro distributeur à tiroir Valve - 3600 psi (250 bar)
DWDB
Value Series 3 Voies, à action directe, électro distributeur Clapet Valve - 3600 psi (250 bar)

Retour Vers le Haut

Ressources Complémentaires [ + ]

A la Une de Sun

Cartouches Sun avec joints EPDM

Technical Information

Retour Vers le Haut

990811007 | Accessoires » Pochette de Joints Pour Cartouche | Sun Hydraulics

Assembly Build Process

Assembly Build Process

Pochette de joints pour cartouche, taille 1 - cavité T-11A, Buna-N

Footer