Assembly Build Process

Sun's Assembly Build Process allows you to configure a cartridge and manifold, or main stage and pilot stage cartridge, and build a digital assembly in three dimensional space. The resulting output of this process is the assembly product page, including configuration-specific images, symbols, product information and CAD files for download.

The Assembly Build Process can be accessed from either a cartridge or manifold product page. Only valid choices are allowed.

From a manifold page, you must first choose your cartridge function. Once you choose your function, click on the BUILD ASSEMBLY button below the WHERE TO BUY BUTTON. Once clicked, you will be presented with valid cartridges for your manifold. Select the cartridge of your choice and follow the instructions at the top of the page. If your particular combination has been generated before, the resulting assembly page will be available immediately. If not, you will be asked to enter your email address. Once the page is complete, an email will be sent to you including a link to the assembly product page.

From a cartridge product page, click on BUILD ASSEMBLY and you will be presented with a listing of compatible manifolds. In the case of main stage and pilot stage cartridges, you can either build a cartridge to cartridge assembly or a cartridge to manifold assembly. Once your choice has been made, follow the instructions at the top of the page. If your particular combination has been generated before, the resulting assembly page will be available immediately. If not, you will be asked to enter your email address. Once the page is complete, an email will be sent to you including a link to the assembly product page.

Please note that the Assembly Build Process is an automated process. It can be utilized at any time. Pages are generated typically within minutes but delays can occasionally be expected. In the event of a delay, a team at Sun will work to resolve the issue to ensure you receive your information as quickly as possible.

4-vías, 3-posiciones, ISO 4401-05 electro-proporcional direccional Control válvula - 5000 psi (350 bar)

Capacidad: 21.1 gpm80 L/min. | Cavidad:

Expand All

Technical Features [ + ]

Direct-acting proportional control valve with subplate mounting interface per ISO 4401, DIN 24340 (CETOP 05)
Used for directional and speed control of hydraulic actuators
Valve opening and resulting flow rate can be modulated continuously in proportion to the reference signal
The coil current, which initializes the flow through the proportional directional valve, can differ due to the production tolerances in the range of ±6% of the limit current.
Valve can be controlled directly by the Sun XMD driver to exploit valve performance to the fullest.
Wide range of solenoid electrical termination versions available
Five-chamber housing design with reduced hydraulic power dependence on fluid viscosity
The coil is fastened to the core tube with a retaining nut and can be rotated by 360° to suit the available space
Wide range of interchangeable spools available
Enhanced surface protection for mobile sector standard (ISO 9227, 520 h salt spray)

Technical Data [ + ]

Notar: Los datos pueden variar según la configuración . Consulte la sección de CONFIGURATION

Capacity	21.1 gpm80 L/min.
Hysteresis	< 6 %< 6 %
Model Weight (with coil)	12.8 lb4,3 kg
Interface	ISO 05ISO 05
Seal Material	Buna-NBuna-N
Ambient Temperature Range	-22 to 122 °F-30 to 50 °C
Max. operating press. at ports P,A,B	5080 psi350 bar
Max. operating press. at port T	3050 psi210 bar
Fluid Temperature Range	-22 to 176 °F-30 to 80 °C

Performance Curves [ + ]

Performance Curve for 75V520: 4-vías, 3-posiciones, ISO 4401-05 electro-proporcional direccional Control válvula - 5000 psi (350 bar)

FAQs [ + ]

How big is a drop of hydraulic oil?

There are exactly 250 Sun drops in a cubic inch or 15 in a cc.

Direct acting or pilot operated - what do I use?

Direct-acting valves are used to prevent over pressure, and pilot-operated valves are used to regulate pressure. If you are unsure, use a direct-acting valve. Sun's direct acting valves are very fast, dirt tolerant, stable, and robust. Sun's pilot-operated valves are moderately fast, they have a low pressure rise vs. flow curve, and they are easy to adjust.

What parts of the Sun cartridge valve are field serviceable?

Only external seals are serviceable. Sun offers replacement seal kits for all cartridge models. The applicable kit part number can be found in the product page's Technical Data table or by using our Cartridge Seal Kit search function located under Accessories. Please note: Converting the external seals from one material to another does not ensure fluid compatibility with that material due to the existence of internal seals within the cartridge.

Notes [ + ]

One solenoid must be de-energized before the other solenoid can be charged.
Mounting bolts M5 x 45 DIN 912-10.9 or studs must be ordered separately. Tightening torque is 8.9 Nm (6.56 ft-lbf).

Additional Resources [ + ]

Realces

Technical Tips

Manufacturing Sun Cartridge Cavities (522.27 KB)

Technical Information

75V520 | Cartuchos » Directional » 4-vías | Sun Hydraulics

Assembly Build Process

Assembly Build Process

4-vías, 3-posiciones, ISO 4401-05 electro-proporcional direccional Control válvula - 5000 psi (350 bar)

Footer