4-vías, 3-posiciones, alimentación regulada proporcional direccional válvula
This valve is a 4-way, 3-position proportional directional valve. Work ports 2 and 4 are drained to 5 in the center position and port 3 is closed. Pilot pressure at port 1 opposes the spring and creates a variable metering orifice between ports 3 and 4 that is proportional to the pressure at 1. Piloting 6 opens 3 to 2. The force balance of the flow forces, spring and pilot pressure results in a degree of partial self-compensation as the load pressure changes.
Pressure at ports 1 and 6 directly oppose each other.
- Pilot ports 1 and 6 will accept 5000 psi (350 bar), however, pressures over 500 psi (35 bar) do not increase flow since at this point the spool will be fully shifted.
- These valves may be pressure compensated by an external, modulating, logic element. Use LR_C-XHN for a bypass circuit or LP_C-XHN for a restrictive circuit.
- The valve provides a degree of self-compensation and may be used as a flow control. To increase the accuracy of flow control, an external, modulating, logic element can be used to maintain a constant flow over a wider range of flows and pressures. See performance curves for additional information.
- Pressure at ports 1 and 6 directly oppose each other.
- Incorporates the Sun floating style construction to minimize the possibility of internal parts binding due to excessive installation torque and/or cavity/cartridge machining variations.
|Capacity||18 gpm70 L/min.|
|Maximum Operating Pressure||5000 psi350 bar|
|Pilot Pressure Required to Shift Valve||50 - 120 psi3,5 - 8 bar|
|Pilot Pressure Required for Full Shift at Rated Flow||290 - 340 psi20 - 23 bar|
|Maximum Valve Leakage at 110 SUS (24 cSt)||2.7 in³/min.@500 psi44 cc/min.@35 bar|
|Pilot Volume Displacement||.04 in³0,66 cc|
|Hysteresis at 50% command||±35%±35%|
|Valve Hex Size||1 1/8 in.28,6 mm|
|Compensated Flow (using LPJCXHN)||17 - 21 gpm64 - 80 L/min.|
|Valve Installation Torque||45 - 50 lbf ft61 - 68 Nm|
|Model Weight||1.00 lb0,45 kg|
|Seal kit - Cartridge||Buna: 990052007|
|Seal kit - Cartridge||Viton: 990052006|
There are exactly 250 Sun drops in a cubic inch or 15 in a cc.
Direct-acting valves are used to prevent over pressure, and pilot-operated valves are used to regulate pressure. If you are unsure, use a direct-acting valve. Sun's direct acting valves are very fast, dirt tolerant, stable, and robust. Sun's pilot-operated valves are moderately fast, they have a low pressure rise vs. flow curve, and they are easy to adjust.
- Sun Offers Zinc-Nickel Plating for Corrosion Resistance
- Válvulas y bobinas a solenoides de la serie Sun FLeX
- Pilot-to-Shift Directional Valves and Proportional Throttles
- Sun Expands Corrosion-Resistant Solutions
- Sun Cartridges with EPDM Seals
- Nuevas válvulas direccionales accionadas por solenoide de la serie FLeX
- Manually Operated Directional Valves
- QuickDesign con SmartConnect Ofrece una Herramienta para Construir Esquemáticos
- Pilot Controlled Directional Cartridges Technical Tips
- Manufacturing Sun Cartridge Cavities (522.27 KB)