P to T, manifold T port

Function

Function for CTC: Air-Bleed and Start-up
Air-Bleed and Start-up
Port Designators [ + ]
Modifiers Ports
CTC, /V Ports A, B, P: 1/2" NPTF; Port T: 1/2" NPTF; Gage Port: 1/4" NPTF;
Technical Features [ + ]

Pilot-operated, balanced-piston relief cartridges are normally closed pressure regulating valves. When the pressure at the inlet (port 1) reaches the valve setting, the valve starts to open to tank (port 2), throttling flow to regulate the pressure. These valves are accurate, have low pressure rise vs. flow, they are smooth and quiet, and are moderately fast.

Technical Data [ + ]
Body Type SubplateSubplate
Interface ISO 05ISO 05
Body Features P to T, manifold T portP to T, manifold T port
Open Cavities 11
Cavity T-3A
Port Size 1/2" NPTF1/2" NPTF
FAQs [ + ]

There are exactly 250 Sun drops in a cubic inch or 15 in a cc.

Notes [ + ]
  • This subplate is designed to mount to the top of a reservoir. Tank is an NPTF port to accommodate a down pipe to drop the connection below the oil level. The tank port and mounting holes are supplied with O rings to seal to the mounting surface.
  • Important: Carefully consider the maximum system pressure. The pressure rating of the manifold is dependent on the manifold material, with the port type/size a secondary consideration. Manifolds constructed of aluminum are not rated for pressures higher than 3000 psi (210 bar), regardless of the port type/size specified.
Additional Resources [ + ]