On P, port 3 to T, bottom T port

Function

Function for ETB: Reducing/Relieving on P
Reducing/Relieving on P
Function for ETB: Reducing on P
Reducing on P
Port Designators [ + ]
Modifiers Ports
ETB, /V Ports A, B, P: 3/8" NPTF; Port T: 3/8" NPTF; Gage Port: 1/4" NPTF;
Technical Data [ + ]
Body Type SubplateSubplate
Interface NoneNone
Body Features On P, port 3 to T, bottom T portOn P, port 3 to T, bottom T port
Mounting Hole Diameter .28 in.7,1 mm
Mounting Hole Depth ThroughThrough
Mounting Hole Quantity 44
Open Cavities 11
Cavity T-11A
Port Size 3/8" NPTF3/8" NPTF
FAQs [ + ]

There are exactly 250 Sun drops in a cubic inch or 15 in a cc.

Notes [ + ]
  • This subplate is designed to mount to the top of a reservoir. Tank is an NPTF port to accommodate a down pipe to drop the connection below the oil level. The tank port and mounting holes are supplied with O rings to seal to the mounting surface.
  • Important: Carefully consider the maximum system pressure. The pressure rating of the manifold is dependent on the manifold material, with the port type/size a secondary consideration. Manifolds constructed of aluminum are not rated for pressures higher than 3000 psi (210 bar), regardless of the port type/size specified.
Additional Resources [ + ]