740 Series, 28 VDC, high-power coil with ISO/DIN 43650, Form A connector with TVS Diode

740228D : 740 Series, 28 VDC, high-power coil with ISO/DIN 43650, Form A connector with TVS Diode
Technical Features [ + ]
  • Coil windings utilize Class N, (392° F [200 °C] rated) magnet wire.
  • Power cable with mating connector is required and is not included with the coil.
  • The coil is magnetically symmetrical and can be mounted on the solenoid tube in either direction for best cable access without affecting performance.
  • Coil is fully RoHS compliant. Restricted materials less than 0.1% total by weight.
  • The external steel shell is zinc-nickel plated and provides 1000-hour salt fog protection.
  • Coil includes a transient voltage suppression (TVS) diode.
  • For optimum proportional performance, an amplifier with current sensing and adjustable dither should be used. Dither should be adjustable between 100 - 250 Hz.
  • IP rating for this coil is IP65/IP67.
Technical Data [ + ]
Operating Temperature Range -40 to 230 °F-40 to 110 °C
Arc Suppression (TVS) IncludedIncluded
Power Consumption (cold) - at rated voltage 25 Watts25 Watts
Maximum Ambient Temperature 122 °F50 °C
Voltage/Frequency 28 VDC28 VDC
Duty Cycle Rating 100 %100 %
Connector ISO4400 - EN/DIN175301-803, Form A (ISO/DIN 43650) 3-pinISO4400 - EN/DIN175301-803, Form A (ISO/DIN 43650) 3-pin
Solenoid Tube Diameter .62 in.15,7 mm
Coil Nut Torque 4.5 lbf in.0,5 Nm
Model Weight 9.6 oz.272 grams
Proportional Performance Data [ + ]
Resistance at 20º C 31.4 ohms ±10%31.4 ohms ±10%
TVS Diode (nominal) breakdown voltage 68 VDC68 VDC
FAQs [ + ]
740 Series coils meet Sun specification S-367. This specification is on our website under Technical Resources and is also listed in the Additional Resources tab on applicable product pages. Please see sections 11 and 12 of Environmental Test Specification for Electrical and Electronic Components; S-367.
Used With [ + ]

What models can this kit be used with?

  • DBAF 3-way solenoid-operated directional spool valve - pilot capacity
  • DFBF FLeX Series 2-way, 2-stage, solenoid-operated directional poppet valve with reverse flow check - flow 2-1
  • DFBG FLeX Series 2-way, 2-stage, solenoid-operated directional poppet valve with reverse flow check - flow 2-1
  • DLDF 2-way, solenoid-operated directional spool valve
  • DMBF FLeX Series 3-way, solenoid-operated directional spool valve
  • DNBF FLeX Series 4-way, 2-position, solenoid-operated directional spool valve
  • DTAF FLeX Series 2-way, direct-acting, solenoid-operated directional blocking poppet valve
  • DTBF FLeX Series 2-way, direct-acting, solenoid-operated directional blocking poppet valve
  • DTDF 2-way, direct-acting, solenoid-operated directional blocking poppet valve
  • DWDF 3-way, direct-acting, solenoid-operated directional poppet valve
  • FPBF FLeX Series pilot-operated, normally closed, electro-proportional throttle - flow 2-1
  • FPBG FLeX Series pilot-operated, normally closed, electro-proportional throttle with reverse flow check - flow 2-1
  • FPBI FLeX Series pilot-operated, normally open, electro-proportional throttle - flow 2-1
  • FPBJ FLeX Series pilot-operated, normally open, electro-proportional throttle with reverse flow check - flow 2-1
  • FPBU FLeX Series electro-proportional, blocking poppet throttle - normally closed
  • RVCK FLeX Series 2-stage, solenoid-operated adjustable relief valve, normally vented
  • RVCL FLeX Series 2-stage, solenoid-operated adjustable relief valve, energize to vent
  • RVCM FLeX Series 2-stage, solenoid-operated adjustable relief valve, energize to block
  • RVCN FLeX Series 2-stage, solenoid-operated adjustable relief valve, normally blocked
  • 991711300 XMD Series, 12-pin Deutsch prototype cable, single-output - 3M
  • 991711600 XMD Series, 12-pin Deutsch prototype cable, single-output - 6M
  • 991712300 XMD Series, 12-pin Deutsch prototype cable, double-output - 3M
  • 991712600 XMD Series, 12-pin Deutsch prototype cable, double-output - 6M
  • 991713030 XMD Series, 2-pin Deutsch prototype cable - 30CM
  • 991713060 XMD Series, 2-pin Deutsch prototype cable - 60CM
  • 991740001 XMD Series, high-power coil clip kit
  • XMD-01 Configurable single-output driver used with proportional and solenoid-operated switching valves
  • XMD-02 Configurable double-output driver used with proportional and solenoid-operated switching valves
Additional Resources [ + ]